Angle and torque wrench MANOSKOP®

714

Artikel-Nr. 96500965|EAN 4018754222858

An angle and torque wrench for bolted joints in accordance with the torque, angle of rotation, torque with "angle of rotation" monitoring variable and angle of rotation with "torque" monitoring variable tightening method.
Electromechanically displaying (with electronic measurement) and triggering (with the familiar mechanical “click”).
Visual evaluation of the bolted joint.
Simple documentation of the recorded measurements on the PC via the USB interface and via an optional Bluetooth Low Energy module.
Thanks to the combination of the patented electromechanical triggering and the display and acoustic feedback, the wrench provides signalling with maximum optimisation.

Produkt-Varianten

Product no.	Size	Model	Measuring range N·m	Measuring range ft·lb	Measuring range in·lb	Length mm (L)	Width mm (b)	Height mm (h)	Battery type	Size tool holder [internal square drive]	LF	SF	Weight	Weight with box	Maß-Skizze
96500100	100	714	100-1000 N·m	74-750 ft·lb	900-9000 in·lb	1343 mm	30,6 mm	25,6 mm	Micro (AAA) 1,5V	22 x 28 mm	1343 mm	55 mm	4990 g	10500 g	Jetzt entdecken
96500901	1	714	1-10 N·m	0,7-7,5 ft·lb	9-90 in·lb	226 mm	28 mm	23 mm	Micro (AAA) 1,5V	9 x 12 mm	188 mm	17,5 mm	370 g	795 g	Jetzt entdecken
96500902	2	714	2-20 N·m	1,5-15 ft·lb	18-180 in·lb	226 mm	28 mm	23 mm	Micro (AAA) 1,5V	9 x 12 mm	188 mm	17,5 mm	380 g	805 g	Jetzt entdecken
96500904	4	714	4-40 N·m	3-30 ft·lb	36-360 in·lb	252 mm	28 mm	23 mm	Micro (AAA) 1,5V	9 x 12 mm	214 mm	17,5 mm	420 g	845 g	Jetzt entdecken
96500906	6	714	6-60 N·m	4,5-45 ft·lb	54-540 in·lb	393 mm	28 mm	23 mm	Micro (AAA) 1,5V	9 x 12 mm	355 mm	17,5 mm	810 g	1235 g	Jetzt entdecken
96500910	10	714	10-100 N·m	7,4-75 ft·lb	90-900 in·lb	466 mm	28 mm	23 mm	Micro (AAA) 1,5V	9 x 12 mm	428 mm	17,5 mm	1085 g	1655 g	Jetzt entdecken
96500920	20	714	20-200 N·m	15-150 ft·lb	180-1800 in·lb	547 mm	28 mm	23 mm	Micro (AAA) 1,5V	14 x 18 mm	516 mm	25 mm	1361 g	1896 g	Jetzt entdecken
96500940	40	714	40-400 N·m	30-300 ft·lb	360-3600 in·lb	687 mm	28 mm	23 mm	Micro (AAA) 1,5V	14 x 18 mm	656 mm	25 mm	1765 g	5155 g	Jetzt entdecken
96500965	65	714	65-650 N·m	48-480 ft·lb	580-5800 in·lb	890 mm	30,6 mm	25,6 mm	Micro (AAA) 1,5V	22 x 28 mm	890 mm	55 mm	3222 g	7000 g
															Jetzt entdecken

Eigenschaften

4 measuring modes (torque, angle of rotation, torque with “angle of rotation” monitoring variable, angle of rotation with “torque” monitoring variable)
high-resolution colour OLED display and side signal lights
visual evaluation of the bolted joint: Yellow light (pre-warning threshold reached), green light (within target range), red light (measurement outside tolerance range)
freely configurable menu structure
battery compartment cap with bayonet connection
optional: Li-ion battery no. 7195-2 and charger no. 7160
3 function modes: click (patented electromechanical triggering), peak hold (displaying mode with peak value display) and track (displaying mode with actual value display)
micro USB interface for data communication
optional Bluetooth low energy module (5.2)
QuickRelease security lock - insert tool changing system
data storage for up to 2,500 tightenings, including date and time stamp
up to 200 screw joints in a maximum of 25 sequences can be programmed
different tolerance limits adjustable depending on the type of bolted joint
acoustic and visual evaluation of the bolted joint
fast and precise setting via the keypad
no unintentional adjustments thanks to password-protected keypad lock
acoustic and visual signal warns of torque wrench overload and forced triggering in clockwise tightening mode
automatic indication of the next calibration date, user-configurable according to elapsed time and/or number of operations
fully automatic calibration and adjustment with the perfectControl® calibration and adjustment device No. 7794-2 (torque) or 7794-3 (torque and angle of rotation) for reducing error influencing factors
units of measurement: N·m, ft·lb, in·lb
automatic extension length compensation: Possibility of entering a custom extension length to ensure that the required target value is achieved correctly with compensation for the lever extension
ready for operation again immediately after release
clockwise and anticlockwise tightening - the insert tool must be rotated for anticlockwise torque in “triggering” function mode
visual, acoustic and tactile trigger signal
torque and angle of rotation displays visible at the same time
measurement regardless of the force application point (for sizes 1, 2 and 4)
safe handling due to the ergonomically shaped 2-component handle (resistant to the most common oils, greases, fuels, brake fluids and Skydrol)
3 certificates included (torque displaying/triggering in accordance with DIN EN ISO 6789-2:2017, angle of rotation based on VDI/VDE 2648-2)
in sturdy plastic box (sizes 40-100 in sheet steel box)
registered design, patented
supplied with SensoMaster 4 software, USB cable, 4 micro-batteries AAA/LR03, 1.5 V
angle of rotation display resolution 0.1°
angle of rotation display deviation ±1°, ±1 digit to 100°, >100° at least 1%, ± 1 digit
torque display resolution ≤ 60 N·m: 0.01 N·m; > 60 N·m: 0.1 N·m; >400 N·m: 1 N·m
torque display deviation ± 2%, ± 1 digit

Produkt-Highlights

Angle of rotation and torque measurement

Our torque and angle wrenches make it possible to tighten bolted joints in accordance with the torque, angle of rotation, torque with "angle of rotation" monitoring variable and angle of rotation with "torque" monitoring variable tightening method. Thanks to this functional diversity, the wrench is suitable for the most popular tightening methods.

Electromechanical triggering.

The patented electromechanical MANOSKOP® 714 measures the applied torque electronically. A visual evaluation of the bolted joint is shown by means of a display and side signal lights. Unlike a purely electronic torque wrench, the triggering and haptic user feedback are provided mechanically. A distinctly perceptible jolt and a clearly audible click indicate that the target value has been reached.

Comprehensive documentation.

Our electromechanical torque wrenches can be documented. They can be easily configured and programmed using the SensoMaster software. This means that all data can be read out, stored and subjected to further processing on the PC for better monitoring and optimization of the work processes. The digital measurement also allows the actual torque which has been applied (actual value) to be specified after triggering, as well as the target value.