Torque wrench set

Image

Torque wrench set

730R/40/32 Quick

Artikel-Nr. 96502053|EAN 4018754082018

    Produkt-Varianten

    Product no.ModelMeasuring range N·mMeasuring range ft-lbLength mm (L)Width mm (b)Height mm (h)Number of toolsWeight (g)TypeScale division N·mScale division ft-lb
    96502053730R/40/32 Quick80-400 N·m60-300 ft·lb640 mm240 mm60 mm32 9739 gMercedes-Benz10 N·m10 ft·lb

    Technologien und Leistungsmerkmale

    QuickRelease

    The QuickRelease safety lock prevents unintentional loss of insert tools. These click securely into place and are only released again at the push of a button for a quick tool change.

    Low-wear flexible rod system

    Our torque wrench is equipped with a low-wear release system with a bending beam. Unlike conventional torque wrenches with coiled springs, the flexible rod is not preloaded in the unloaded state, which means that the spring does not need to be reset to "0" after use.

    DIN EN ISO 6789-2

    Our torque wrenches and torque screwdrivers are professionally calibrated in accordance with DIN EN ISO 6789-2 and delivered with a corresponding calibration certificate. We also calibrate the torque and angle wrenches in accordance with VDI 2648-2. This ensures the accuracy and traceability of our tools.

    Eigenschaften

      • for general maintenance work
      • in steel case

      Key features of torque wrench No. 730/40 Quick

      • clicking type with dual stop signal
      • no reset to '0' required
      • the measuring element is only under load when a force is applied
      • with holder for interchangeable insert tools
      • with QuickRelease safety lock (size 5-65)
      • non-slip adjuster with thumb recess for quick torque adjustment
      • arrow-shaped pointers
      • clicking mechanism insensitive to continuous loads and counter-loads (up to the max. measurement range of the torque wrench)
      • optimal calibration with perfectControl® calibration systems No. 7794 or calibration systems No. 7706, 7791
      • counter-clockwise tightening by flipping the insert tools over
      • easy adjustment without disassembly via 2 external adjustment screws
      • with 2-component handle
      • calibration certificate in accordance with DIN EN ISO 6789‑2:2017
      • accuracy ± 4%

      Contains 32-pieces:

      1 torque wrench Service MANOSKOP® No. 730R/40 Quick: measurement range: 80-400 N·m

      1 ratchet insert, reversible 1/2" No. 735/20: 60 teeth

      1 square drive insert tool 1/2" No. 734/20

      7 open-ended insert tools No. 731/40: 13; 15; 17; 19; 22; 27; 30 mm

      1 open-ended insert tool No. 3731/40: 24 mm

      7 ring insert tools No. 732/40: 13; 15; 17; 19; 22; 24; 27 mm

      10 sockets with bi-hex 1/2" No. 50: 13; 14; 15; 17; 19; 22; 24; 27; 30; 32 mm

      1 T-handle 1/2" No. 506: L 300 mm

      3 extensions 1/2" No. 509: L. 55; 130; 255 mm

    Produkt-Highlights

    Rapid adjustment.

    Easy and quick adjustment of the torque is carried out by an easy-to-operate clamping lever in the handle. The scale can be moved quickly and safely with an ergonomically shaped, non-slip adjustment element with thumb recess.

    Adjustment does not require disassembly.

    Quick adjustment from outside, no disassembly of the torque wrench required, with 2 adjustment points for the maximum & minimum values.

    Downloads

    Produktdatenblatt: STAHLWILLE_96502053_730R-40-32 QUICK_us.pdf
    PDF | 2.37 MB
    In unserem Kundenportal bieten wir weitere Informationen und Downloads.
    Networked tools

    On-demand webinar

    Your path to networked manufacturing and maintenance

    Request recording free-of-charge!