Torque wrench series MANOSKOP® with holder for insert tools

Artikel-Nr. 50010030|EAN 4018754031658

Produkt-Varianten

Product no.	Size	Model	Measuring range N·m	Measuring range ft-lb	MA N·m	Nominal value N·m	Length mm (L)	Width mm (b)	Height mm (h)	Tool holder size [internal square]	LF	SF	Weight (g)	Maß-Skizze
50010004	4	755	4-40 N·m	3-30 ft·lb	4 N·m	40 N·m	201 mm	22 mm	18 mm	9 x 12 mm	172 mm	17,5 mm	500 g	Jetzt entdecken
50010010	10	755	20-100 N·m	15-74 ft·lb	20 N·m	100 N·m	318 mm	28 mm	24 mm	9 x 12 mm	289 mm	17,5 mm	635 g	Jetzt entdecken
50010020	20	755	40-200 N·m	30-147 ft·lb	40 N·m	200 N·m	457 mm	28 mm	24 mm	14 x 18 mm	435 mm	25 mm	1045 g	Jetzt entdecken
50010030	30	755	60-300 N·m	40-220 ft·lb	60 N·m	300 N·m	609 mm	28 mm	24 mm	14 x 18 mm	587 mm	25 mm	1210 g

clicking type with dual stop signal
for work on assembly lines or for repetitive production tasks.
no adjustment scale; therefore adjustment with test equipment is required, e.g. with the STAHLWILLE test devices No. 7707 W, SmartCheck or the perfectControl® calibration systems No. 7794, or calibration systems No. 7706. 7791)
with holder for interchangeable insert tools
particularly slim design
handle and shaft made of square steel pipe
Further loading after clicking or loads in the opposite direction of operation (up to the max. measurement range of the torque wrench) do not affect the trigger mechanism, which protects it from damage
counter-clockwise tightening by flipping the insert tools over
can be supplied pre-set at defined torque value and with certification (additional charge applies)
accuracy ± 4%

Bedienungsanleitung: 91979860-ba-manoskop-755R-1-755.pdf

PDF | 0.47 MB

Produktdatenblatt: STAHLWILLE_50010030_755-30_us.pdf

PDF | 0.11 MB

In unserem Kundenportal bieten wir weitere Informationen und Downloads.