Torque wrench service MANOSKOP® with holder for insert tools
Torque wrench service MANOSKOP® with holder for insert tools
730N
Artikel-Nr. 50181365|EAN 4018754239986
Produkt-Varianten
| Product no. | Size | Model | Measuring range N·m | Measuring range ft-lb | MA N·m | Nominal value N·m | Length mm (L) | Width mm (b) | Height mm (h) | Fine scale division | Tool holder size [internal square] | LF | SF | Weight (g) | Scale division N·m | Scale division ft-lb | Description | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 50181005 | 5 | 730N | 10-50 N·m | 7-37 ft·lb | 10 N·m | 50 N·m | 330 mm | 28 mm | 23 mm | 0,25 N·m | 9 x 12 mm | 280,5 mm | 17,5 mm | 831 g | 5 N·m | 1 ft·lb | Torque wrench service MANOSKOP® 730N 10-50N·m 9 x 12 mm L. 330mm | Jetzt entdecken |
| 50181010 | 10 | 730N | 20-100 N·m | 15-75 ft·lb | 20 N·m | 100 N·m | 386 mm | 28 mm | 23 mm | 0,5 N·m | 9 x 12 mm | 336 mm | 17,5 mm | 988 g | 10 N·m | 2,5 ft·lb | Torque wrench service MANOSKOP® 730N 20-100N·m 9 x 12 mm L. 386mm | Jetzt entdecken |
| 50181012 | 12 | 730N | 25-130 N·m | 20-95 ft·lb | 25 N·m | 130 N·m | 421 mm | 28 mm | 23 mm | 0,5 N·m | 14 x 18 mm | 379 mm | 25 mm | 1128 g | 10 N·m | 2,5 ft·lb | Torque wrench service MANOSKOP® 730N 25-130N·m 14 x 18 mm L. 421mm | Jetzt entdecken |
| 50181020 | 20 | 730N | 40-200 N·m | 30-150 ft·lb | 40 N·m | 200 N·m | 467 mm | 28 mm | 23 mm | 1 N·m | 14 x 18 mm | 424,5 mm | 25 mm | 1264 g | 10 N·m | 5 ft·lb | Torque wrench service MANOSKOP® 730N 40-200N·m 14 x 18 mm L. 467mm | Jetzt entdecken |
| 50181040 | 40 | 730N | 80-400 N·m | 60-300 ft·lb | 80 N·m | 400 N·m | 607 mm | 28 mm | 23 mm | 2 N·m | 14 x 18 mm | 564,5 mm | 25 mm | 1655 g | 20 N·m | 10 ft·lb | Torque wrench service MANOSKOP® 730N 80-400N·m 14 x 18 mm L. 607mm | Jetzt entdecken |
| 50181065 | 65 | 730N | 130-650 N·m | 100-480 ft·lb | 130 N·m | 650 N·m | 890 mm | 30,6 mm | 25,6 mm | 2,5 N·m | 14 x 18 mm | 848 mm | 25 mm | 3231 g | 50 N·m | 20 ft·lb | Torque wrench service MANOSKOP® 730N 130-650N·m 14 x 18 mm L. 890mm | Jetzt entdecken |
| 50181080 | 80 | 730N | 160-800 N·m | 120-600 ft·lb | 160 N·m | 800 N·m | 1178 mm | 30,6 mm | 25,6 mm | 5 N·m | 22 x 28 mm | 1167 mm | 55 mm | 4825 g | 100 N·m | 25 ft·lb | Torque wrench service MANOSKOP® 730N 160-800N·m 22 x 28 mm L. 1178mm | Jetzt entdecken |
| 50181100 | 100 | 730N | 200-1000 N·m | 150-750 ft·lb | 200 N·m | 1,000 N·m | 1363 mm | 30,6 mm | 25,6 mm | 5 N·m | 22 x 28 mm | 1352 mm | 55 mm | 5000 g | 100 N·m | 25 ft·lb | Torque wrench service MANOSKOP® 730N 200-1000N·m 22 x 28 mm L. 1363mm | Jetzt entdecken |
| 50181365 | II/65 | 730N | 130-650 N·m | 100-480 ft·lb | 130 N·m | 650 N·m | 911 mm | 30,6 mm | 25,6 mm | 2,5 N·m | 22 x 28 mm | 900 mm | 55 mm | 3504 g | 50 N·m | 20 ft·lb | Torque wrench service MANOSKOP® 730N 130-650N·m 22 x 28 mm L. 911mm |
Technologien und Leistungsmerkmale
Factory calibration certificate (ISO calibration)
Our torque tools, transducers, and test equipment are delivered with a factory calibration certificate in accordance with DIN EN ISO 6789-2:2017, and based on DKD-R 10-8 for traceability of the measuring equipment.
Low-wear flexible rod system
Our torque wrench is equipped with a low-wear trigger system with a bending beam. Unlike conventional torque wrenches with coiled springs, the flexible rod is not preloaded in unloaded state, which means that the 'spring' does not need to be reset to '0' after use.
QuickRelease
The QuickRelease safety lock prevents unintentional loss of insert tools. These click securely into place and are only released again at the push of a button for a quick tool change.
2-component handle
Our 2-component handle is non-slip and ergonomically designed. It is resistant to the most common oils, greases, fuels, brake fluids, and Skydrol. The arrow markings on the handle indicate the direction of operation.
Eigenschaften
- clicking type with dual stop signal
- no reset to '0' required
- the measuring element is only under load when a force is applied
- with holder for interchangeable insert tools
- with QuickRelease safety lock
- dual scale N·m/ft·lb
- clicking mechanism insensitive to continuous loads and counter-loads (up to the max. measurement range of the torque wrench)
- counter-clockwise tightening by flipping the insert tools over
- calibration with perfectControl® calibration device No. 7791, 7794 or calibration system No. 7706
- easy adjustment without disassembly via 2 external adjustment screws
- supplied in a textile bag (from size 65)
- with 2-component handle
- calibration certificate in accordance with DIN EN ISO 6789-2:2017
- accuracy ± 3%
Produkt-Highlights
Adjustment does not require disassembly.
Quick adjustment from outside, no disassembly of the torque wrench required, with 2 adjustment points for the maximum & minimum values.
Clicking dual stop signal.
When the target torque is reached, MANOSKOP® 730N provides a noticeable tactile dual stop signal.
Clear fine adjustment.
The easy-to-use and easy-to-read double scale in N·m/ft·lb allows precise and easy target torque adjustment for reliable and accurate application.
In unserem Kundenportal bieten wir weitere Informationen und Downloads.
Zubehör-Artikel.
Service
2025© All Rights Reserved