Torque wrench service MANOSKOP® (N·m)
Torque wrench service MANOSKOP® (N·m)
730/2 Quick
Artikel-Nr. 50184002|EAN 4018754292653
- Quick adjustment thanks to easy-to-operate clamping lever in handle.
- Efficient. No reset to "0" necessary, as measuring element is only strained during the tightening process.
- Ergonomically shaped, non-slip adjustment element with thumb recess and optimised ball handle for fatigue-free work.
- Releasing torque wrench with receptacle for exchangeable plug-in tools, double stop signal (tactile and audible), left-hand tightening by turning over the plug-in tools.
- With calibration certificate, display deviation ± 4%.
Produktvideo
Produkt-Varianten
| Product no. | Size | Measuring range N·m | Length mm (L) | Width mm (b) | Height mm (h) | Size tool holder [internal square drive] | LF | SF | Weight | |
|---|---|---|---|---|---|---|---|---|---|---|
| 50184002 | 2 | 4-20 N·m | 179 mm | 27,5 mm | 23,6 mm | 9 x 12 mm | 157,2 mm | 17,5 mm | 315 g | |
| 50184004 | 4 | 8-40 N·m | 223 mm | 27,5 mm | 23,6 mm | 9 x 12 mm | 200,8 mm | 17,5 mm | 395 g | Jetzt entdecken |
| 91381054 | 2-1 | 2-10 N·m | 179 mm | 27,5 mm | 23,6 mm | 9 x 12 mm | 157,2 mm | 17,5 mm | 315 g | Jetzt entdecken |
Technologien und Leistungsmerkmale
Factory calibration certificate (ISO calibration)
Our torque tools, transducers and test equipment are delivered with a factory calibration certificate in accordance with DIN EN ISO 6789-2 and based on DKD-R 10-8 for traceability of the measuring equipment.
Low-wear flexible rod system
Our torque wrench is equipped with a low-wear trigger system with a bending beam. Unlike conventional torque wrenches with coiled springs, the flexible rod is not preloaded in unloaded state, which means that the 'spring' does not need to be reset to “0” after use.
Eigenschaften
- click-type
- the measuring element is only under load while force is being applied, no need for manual reset to zero
- mount for interchangeable insert/shell tools
- QuickRelease safety lock (sizes 5–65)
- rapid setting thanks to easy-action locking lever in the handle (sizes 5–65)
- ergonomically designed, non-slip adjuster with a thumb recess
- magnifying glass integrated in the display window
- optimised convex handle for strain-free working
- dual stop signal
- twin scales N·m/ft·lb and N·m/in·lb (sizes 5–80)
- on request also available as an N·m-only version without twin scale (sizes 5-65)
- can be applied for either clockwise or anticlockwise tightening by turning the inserts over
- any force applied to the tool after the 'click' or applied in the opposite direction to the current function – e.g. forcible loosening of a jammed screw - does not act on the trigger mechanism and cannot cause damage to it
- calibration using perfectControl® calibrating unit No 7794 or calibration system No 7706. Readjustment does not require disassembly.
- certificate in accordance with DIN EN ISO 6789-2:2017
- display deviation value ± 4%
Produkt-Highlights
Adjustment does not require disassembly.
Quick adjustment from outside, no disassembly of the torque wrench required, with two adjustment points for the maximum & minimum values.
In unserem Kundenportal bieten wir weitere Informationen und Downloads.
