Torque wrench service MANOSKOP® with holder for insert tools

Image

Torque wrench service MANOSKOP® with holder for insert tools

730 Quick

Artikel-Nr. 50184065|EAN 4018754268894
  • Robust, low-maintenance mechanical torque wrench for controlled screw tightening.
  • Triggering occurs with a clear haptic and acoustic click signal.
  • Ergonomically shaped, non-slip adjustment element with thumb recess and optimised ball handle for fatigue-free working.
  • Durable, low-wear flexible rod trigger system eliminates the need to reset to '0'.
  • Quick adjustment from the outside possible without disassembly.

Produktvideo

Image

Produkt-Varianten

Product no.SizeModelMeasuring range N·mMeasuring range ft·lbLength mm (L)Width mm (b)Height mm (h)Size tool holder [internal square drive]LFSFWeightScale division N·mScale division ft·lb
501840055730 Quick6-50 N·m5-36 ft·lb315 mm28 mm23 mm9 x 12 mm288 mm17,5 mm780 g2 N·m1 ft·lb
Jetzt entdecken
5018401010730 Quick20-100 N·m15-72,5 ft·lb370 mm28 mm23 mm9 x 12 mm343 mm17,5 mm936 g2,5 N·m2,5 ft·lb
Jetzt entdecken
5018401212730 Quick25-130 N·m20-95 ft·lb410 mm28 mm23 mm14 x 18 mm390 mm25 mm1074 g2,5 N·m2,5 ft·lb
Jetzt entdecken
5018402020730 Quick40-200 N·m30-145 ft·lb455 mm28 mm23 mm14 x 18 mm435 mm25 mm1310 g5 N·m5 ft·lb
Jetzt entdecken
5018403030730 Quick60-300 N·m50-220 ft·lb520 mm28 mm23 mm14 x 18 mm500 mm25 mm1400 g10 N·m10 ft·lb
Jetzt entdecken
5018404040730 Quick80-400 N·m60-300 ft·lb590 mm28 mm23 mm14 x 18 mm570 mm25 mm1540 g10 N·m10 ft·lb
Jetzt entdecken
5018406565730 Quick130-650 N·m100-480 ft·lb875 mm30,6 mm25,6 mm14 x 18 mm855 mm25 mm3192 g20 N·m20 ft·lb
50184565II/65730 Quick130-650 N·m100-480 ft·lb897 mm30,6 mm25,6 mm22 x 28 mm907 mm55 mm4104 g20 N·m20 ft·lb
Jetzt entdecken

Technologien und Leistungsmerkmale

QuickRelease

The QuickRelease safety lock prevents unintentional loss of insert tools. These click securely into place and are only released again at the push of a button for a quick tool change.

Factory calibration certificate (ISO calibration)

Our torque tools, transducers, and test equipment are delivered with a factory calibration certificate in accordance with DIN EN ISO 6789-2:2017, and based on DKD-R 10-8 for traceability of the measuring equipment.

Low-wear flexible rod system

Our torque wrench is equipped with a low-wear trigger system with a bending beam. Unlike conventional torque wrenches with coiled springs, the flexible rod is not preloaded in unloaded state, which means that the 'spring' does not need to be reset to '0' after use.

2-component handle

Our 2-component handle is non-slip and ergonomically designed. It is resistant to the most common oils, greases, fuels, brake fluids, and Skydrol. The arrow markings on the handle indicate the direction of operation.

Eigenschaften

    • tactile with dual stop signal
    • no reset to '0' required
    • the measuring element is only under load when a force is applied.
    • with holder for interchangeable insert tools
    • with QuickRelease safety lock
    • non-slip adjuster with thumb recess for quick torque adjustment
    • arrow-shaped pointers
    • dual scale N·m/ft·lb
    • also available on request as a N·m only version without dual scale
    • counter-clockwise tightening by flipping the insert tools over
    • triggering mechanism insensitive to continuous loads and counter-loads (up to the max. measurement range of the torque wrench)
    • calibration with perfectControl® calibration device No. 7791, 7794 or calibration system No. 7706
    • easy adjustment without disassembly via 2 external adjustment screws
    • with 2-component handle
    • calibration certificate in accordance with DIN EN ISO 6789-2:2017
    • accuracy ±4 %

Produkt-Highlights

Rapid adjustment.

Easy and quick adjustment of the torque is carried out by an easy-to-operate clamping lever in the handle. The scale can be moved quickly and safely with an ergonomically shaped, non-slip adjustment element with thumb recess.

Adjustment does not require disassembly.

Quick adjustment from outside, no disassembly of the torque wrench required, with two adjustment points for the maximum & minimum values.

Downloads

Bedienungsanleitung: 91979888-ba-manoskop-721-730quick-de-en-fr-es-it-jp.pdf
PDF | 2.31 MB
Kurzanleitung: 91974010-ka-skalenfenster-730quick-en.pdf
PDF | 0.26 MB
Kurzanleitung: 91979888-ka-730quick-en.pdf
PDF | 0.40 MB
Produktdatenblatt: STAHLWILLE_50184065_730-65 QUICK_us.pdf
PDF | 1.49 MB
In unserem Kundenportal bieten wir weitere Informationen und Downloads.

Zubehör-Artikel.