Torque wrench standard MANOSKOP® with fixed ratchet
Torque wrench standard MANOSKOP® with fixed ratchet
721 Quick
Artikel-Nr. 50204030|EAN 4018754268948
- Made in Germany - STAHLWILLE setting torque wrench, length 553 mm, with calibration certificate (DIN EN ISO 6789-2:2017), 50204030.
- Patented, low-wear release system with flexible rod.
- Lightning-fast and precise torque adjustment.
- Continued loading after release or loading in the opposite direction will not damage the torque wrench.
Produkt-Varianten
| Product no. | Size | Model | Measuring range N·m | Measuring range ft-lb | MA N·m | Nominal value N·m | External square drive (inch) | Length mm (L) | b1 | b2 | Height mm (h1) | Height mm (h2) | Number of teeth | LF | Weight (g) | Scale division N·m | Scale division ft-lb | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 50204005 | 5 | 721 Quick | 6-50 N·m | 5-36 ft·lb | 6 N·m | 50 N·m | 3/8 | 352 mm | 28 mm | 27,5 mm | 23 mm | 14,5 mm | 30 | 293 mm | 880 g | 2 N·m | 1 ft·lb | Jetzt entdecken |
| 50204015 | 15 | 721 Quick | 30-150 N·m | 25-110 ft·lb | 30 N·m | 150 N·m | 1/2 | 452 mm | 28 mm | 41 mm | 23 mm | 18 mm | 36 | 387 mm | 1282 g | 5 N·m | 5 ft·lb | Jetzt entdecken |
| 50204020 | 20 | 721 Quick | 40-200 N·m | 30-145 ft·lb | 40 N·m | 200 N·m | 1/2 | 483 mm | 28 mm | 41 mm | 23 mm | 18 mm | 36 | 418 mm | 1349 g | 5 N·m | 5 ft·lb | Jetzt entdecken |
| 50204030 | 30 | 721 Quick | 60-300 N·m | 50-220 ft·lb | 60 N·m | 300 N·m | 1/2 | 553 mm | 28 mm | 44 mm | 23 mm | 27,5 mm | 36 | 486 mm | 1646 g | 10 N·m | 10 ft·lb |
Technologien und Leistungsmerkmale
Low-wear flexible rod system
Our torque wrench is equipped with a low-wear trigger system with a bending beam. Unlike conventional torque wrenches with coiled springs, the flexible rod is not preloaded in unloaded state, which means that the 'spring' does not need to be reset to '0' after use.
2-component handle
Our 2-component handle is non-slip and ergonomically designed. It is resistant to the most common oils, greases, fuels, brake fluids, and Skydrol. The arrow markings on the handle indicate the direction of operation.
Factory calibration certificate (ISO calibration)
Our torque tools, transducers, and test equipment are delivered with a factory calibration certificate in accordance with DIN EN ISO 6789-2:2017, and based on DKD-R 10-8 for traceability of the measuring equipment.
Eigenschaften
- clicking type with dual stop signal
- no reset to "0" required
- the measuring element is only under load when a force is applied.
- Quick adjustment thanks to easy-to-operate locking lever in handle
- non-slip adjuster with thumb recess for quick torque adjustment
- dual scale N·m/ft·lb
- clicking mechanism insensitive to continuous loads and counter-loads (up to the max. measurement range of the torque wrench)
- optimal calibration with perfectControl® calibration systems No. 7794 or calibration systems No. 7706, 7791
- easy adjustment without disassembly via 2 external adjustment screws
- for controlled clockwise tightening
- with 2-component handle
- calibration certificate in accordance with DIN EN ISO 6789-2:2017
- accuracy ± 4%
Produkt-Highlights
Rapid adjustment.
Easy and quick adjustment of the torque is carried out by an easy-to-operate clamping lever in the handle. The scale can be moved quickly and safely with an ergonomically shaped, non-slip adjustment element with thumb recess.
Adjustment does not require disassembly.
Quick adjustment from outside, no disassembly of the torque wrench required, with 2 adjustment points for the maximum & minimum values.
In unserem Kundenportal bieten wir weitere Informationen und Downloads.
Zubehör-Artikel.
Service
2025© All Rights Reserved