Torque tester
Torque tester
SmartCheck 800 DAPTIQ®
- Electronic testing device for checking and adjusting indicating and triggering torque wrenches.
- Easy integration with leading control systems thanks to a bidirectional open source interface.
- The real-time data transfer to the control system supports fast evaluation of the measured values and further actions.
- Easy documentation of the measured values on the PC via USB.
- The large LCD can be rotated 180° and is easy to read from any position.
Produkt-Varianten
| Product no. | Model no. | Measuring range N·m | Measuring range ft·lb | Measuring range in·lb | Width mm (b) | Height mm (h) | Internal square [inch] | t | Weight | Weight with box | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 96521300 | SmartCheck DAPTIQ® 10S * | 1-10 N·m | 0,74-7,4 ft·lb | 8,9-88,5 in·lb | 120 mm | 124 mm | 1/4 " | 167 mm | 5210 g | 6556 g | Jetzt entdecken |
| 96521301 | SmartCheck DAPTIQ® 10 | 1-10 N·m | 0,74-7,4 ft·lb | 8,9-88,5 in·lb | 120 mm | 124 mm | 1/4 " | 167 mm | 5210 g | 6556 g | Jetzt entdecken |
| 96521302 | SmartCheck DAPTIQ® 100 | 10-100 N·m | 7-74 ft·lb | 89-885 in·lb | 120 mm | 124 mm | 3/8 " | 167 mm | 5310 g | 6656 g | Jetzt entdecken |
| 96521303 | SmartCheck DAPTIQ® 400 | 40-400 N·m | 30-295 ft·lb | 354-3540 in·lb | 120 mm | 124 mm | 3/4 " | 167 mm | 5690 g | 7036 g | Jetzt entdecken |
| 96521304 | SmartCheck DAPTIQ® 800 | 80-800 N·m | 59-590 ft·lb | 708-7081 in·lb | 120 mm | 124 mm | 3/4 " | 167 mm | 5690 g | 7036 g | |
| 96521305 | 150-1500 N·m | 111-1106 ft·lb | 111-1106 in·lb | 120 mm | 124 mm | 1 " | 167 mm | 5912 g | 7258 g | Jetzt entdecken |
Eigenschaften
- Industry 4.0
- bidirectional open source interface for optimal integration
- real-time transmission of stored values to the leading system
- for testing both indicating and clicking type torque wrenches
- with exchangeable square drive adaptors for square drive
- large LCD display for optimal readability
- display, display holder and main body can be rotated 180°
- compact design
- display and membrane keypad are splash-proof; the housing is made of impact-resistant plastic
- easy installation thanks to pre-fabricated holes in the mounting bracket
- variable horizontal or vertical installation
- for controlled right and left tightening test
- 3 operating modes: Continuous display of the applied torque (track), display of the torque on triggering/breaking point detection (first peak), peak value display (peak hold)
- individual entry of target torques and tolerances for evaluation of the measured value possible
- with integrated optical and acoustic overload protection
- 3 units of measurement (N·m, ft·lb, in·lb)
- micro USB interface for data export and for optional power supply
- data storage of up to 200 data sets incl. date and time stamp
- documentation software CheckMaster for transferring values and creating test certificates is available free of charge at www.stahlwille.de
- operation via supplied mains power adapter, batteries or rechargeable batteries (4 x AAA or 1 x 9V block, adapter included)
- with factory calibration certificate
- delivery in sturdy plastic case
- display deviation ± 1%
Produkt-Highlights
Intelligent solution for Industry 4.0.
Our SmartCheck DAPTIQ® helps with proactive test medium verification. This allows the testing device to interface seamlessly with leading control systems such as CAQ system and receive and send data in real time. Tolerance deviations can thus be detected and reported faster without interrupting ongoing processes. DAPTIQ® therefore increases safety and efficiency in production and maintenance.
Flexible mounting.
Whether mounted horizontally or vertically, the well-designed mounting points, compact design and rotatable display allow flexible positioning anywhere in the workshop.
Optimum viewing angle.
The compact testing device can be adjusted to the optimum individual viewing angle. The display can be viewed from practically anywhere, as not only the large LCD, but also the display holder and the base body can be rotated by 180°.
Communication and power supply via USB.
SmartCheck is equipped with a convenient micro-USB interface that allows stored test values to be read out and simplifies their transfer to external systems. The USB port also serves as an optional power supply for the device.
Comprehensive documentation.
The SmartCheck testing device can be easily configured with the CheckMaster software allowing direct evaluation of the measurement results. In this way, all data can be read out and saved on the PC for better monitoring and optimization of work processes.
Plug and work.
Our SmartCheck is intuitive to use and is ready for immediate use. It is space-saving and offers versatile mounting options for flexible installation. The device can be operated using a power supply or batteries and can therefore be easily positioned at any workstation, even if there is no power socket available.
