Motorized calibrating and adjusting system
Motorized calibrating and adjusting system
7794-2
- The electronic perfectControl® calibration device with electric drive significantly reduces the effort and time required for calibrations and adjustments of torque wrenches.
- Intelligent and low maintenance design, which means measurement errors caused by incorrect operation are almost impossible.
- In conjunction with the TorkMaster software, calibration certificates are issued in no time at all.
- Calibrations up to 1000 N·m using easy-to-install extension No. 7791-1.
- USB interface for data exchange with the PC.
Produktvideo
Produkt-Varianten
| Product no. | Length mm (L) | Width mm (b) | Height mm (h) | Range N·m | Functional length (LF) max. mm | for transducers | Weight | Profile width | |
|---|---|---|---|---|---|---|---|---|---|
| 96521093 | 1060 mm | 640 mm | 328 mm | 815 mm | 7728 (sizes 1-100) | 51500 g | 180 mm |
Technologien und Leistungsmerkmale
QuickRelease
Eigenschaften
- measurement possible without moving the point of application of force
- prevents faulty readings thanks to precision-mounted spindle and finely regulated motor
- extremely accurate calibration thanks to optimized bearings and square drives for the transducers
- rapid, easy change of transducers thanks to quick-release latching system
- convenient pushbutton controls for clockwise and anticlockwise measurements with automatic speed compensation
- saves time because the bridge support is locked in place using a single-handed eccentric lever
- transmission of readings to a PC via USB interface for further processing, analysis and archiving
- a Declaration of Conformance or a calibration certificate can be printed or saved as a PDF file after calibration
- as found / as left calibrations can be documented
- during calibration, DIN EN ISO 6789:2003 in numerous languages is supported. Additional standards and works standards are available on request
- can be upgraded to perfectControl® calibrating unit No 7794-3 for angle-controlled wrenches
- calibration up to 1000 N·m is possible using the easily attached extension unit No 7791-1
- design patent
- protected by national and international patents
- both clicking and indicating torque wrenches can be calibrated
- calibration of transducers is possible using reference torque wrenches No 7770-10, 7770-100 and 7770-1000, available on request.
- the unit is supplied without the torque wrench, transducers or notebook
- transducers laboratory No 7728
The electronic perfectControl® calibrating unit with its electric drive considerably reduces the amount of effort and time required for calibration and adjustment tasks on torque wrenches
Content:
6 calibrating square drive insert tools No. 734K (sizes 4, 5, 12, 20, 40, 100)
6 square drive adaptors (No. 409M, No. 7787, No. 7788, No. 7789, No. 7789-4, No. 7789-5)
1 USB adaptor No. 7757-1
1 software TorkMaster 7731-1
1 jack cable No. 7751
1 spiral cable No. 7752
1 spiral cable No. 7751-2 with jack plug and self-locking precision plug
1 low-temperature cable connector
1 hexagon key wrench No 10760CV 2 mm are included
Produkt-Highlights
Precision measurements.
perfectControl® calibration devices guarantee controlled, reproducible force application and provide accurate measurement results in conjunction with STAHLWILLE measurement devices and safe handling of the tool. All measurements are made without shifting the force application point.
Extremely efficient thanks to motorized operation.
The electrically powered perfectControl® 7794-2 reduces the amount of effort and time required to produce reproducible results.
Modular and versatile.
The perfectControl® basic versions calibrate torque wrenches up to 400 N·m. Extending with module 7791-1 makes calibrations up to 1,000 N·m possible. The perfectControl® basic versions calibrate torque wrenches up to 400 N·m. Extending with module 7791-1 makes calibrations up to 1,000 N·m possible.
Calibration certificates in an instant.
The USB interface makes exchanging data with the PC seamless. In conjunction with the TorkMaster software, calibration certificates are issued in no time at all.
Even more possibilities.
Additional modules such as connecting to CAQ systems with an automated interface or advanced methods such as machine capability testing (MFU) are available by request.
