Produkt-Varianten

Eigenschaften

Top feature tool trolley

• Three-stage safety concept:
• 1. Central locking with a lateral cylinder lock and hinged key
• 2. Individual locks prevent inadvertent opening while in transit
• 3. Tilt protection – it is not possible to pull out several drawers at the same time.
• Stainless steel handle with reinforced frame connection
• All-round frame protection with shock absorption
• Tightly welded, resilient work surface, storage area, and end panel made of stainless steel
• Oil and acid-resistant ball-bearing smooth-running wheels (125 mm diameter) with thread guards to protect the bearings from dirt and threads, with two locking brakes
• Paper roller and spray can holder included
• 7 easy-to-remove drawers (black RAL 9005) with full-extension runners and bearing cage guide
• Hole pattern on both sides for hooks No. 8031-8041, e.g., for larger tools
• Can be fitted with STAHLWILLE standard and TCS inserts

 

Contents 157-piece set:

11 hex socket wrench bits, 1/4” no. 40: 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm

17 hex socket wrench bits, 1/2” no. 52: 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm

2 extensions, 1/4” no. 405QR: 54; 150 mm

1 QR ratchet No. 415QR N: 1/4”

1 bit connection part no. 3116

2 extensions, 1/2” no. 509QR: 130; 255 mm

1 QR ratchet no. 512QR N: 1/2”

1 transition piece no. 410: 1/4 to 1/2”

1 transition piece no. 513: 1/2 to 3/8”

1 bit holder no. 412: 1/4”

 

2 bit ratchets no. 4008: 1/4”

1 bit holder no. 4007: 1/4”

1 bit set no. 1206: 1 bit holder | L. 25 mm: SL4;5;6mm (2x) | PH1;2;3 (3x) | PZ1;2;3 (3x) | T10;15;20;25;27;30;40 (2x) | T BO10;15;20;25;27;30;40 | INHEX 3;4;5mm | L.75mm: SL6 mm | PH2;3 | PZ1;2 | T20;25 | 56-piece set

 

1 pipe wrench no. 6551: 240 mm

1 heavy-duty diagonal cutting pliers no. 6602: 160 mm

1 needle-nose pliers no. 6529: 200 mm

1 combination pliers no. 6501: 180 mm

 

16 combination spanners no. 13: 6; 7; 8; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24 mm

1 spanner, adjustable no. 4025

5 ratchet combination spanners, flat no. 17F: 8; 10; 13; 17; 19 mm

 

1 electronic slotted screwdriver no. 4628: 0.4 x 2.5 x 60 mm

2 slot screwdrivers No. 4620: 0.8 x 4 x 100; 1.6 x 10 x 200 mm

3 PHILLIPS® screwdrivers no. 4630: PH1; PH2; PH3

1 cable stripping knife no. 12320

1 roller tape measure no. 12935/3: 3 m

1 mini magnet lifter no. 12600: 270 g

1 wooden folding ruler no. 13111: 2 m

1 ball-shaped offset screwdriver set TORX® no. 10771/8: 8-piece set

1 hex ball-shaped offset screwdriver set No. 10767/9: 9-piece set

 

1 engineer’s hammer no. 10961: 500 g

1 soft-faced hammer no. 10959: 35 mm

1 flat chisel no. 102/175: 175 mm

1 pin punch no. 108/150: 150 x 6 mm

1 centre punch no. 105/100: 100 x 10 mm

1 pin punch no. 109/6: 3.4 mm

1 drift punch no. 104/120: 120 x 4 mm