Puller
Puller
11251
Artikel-Nr. 71025102|EAN 4018754342044
- Trigger hooks can be used on both sides.
- Nitrided spindle, no oiling necessary - maintenance-free.
- Self-acting pressing of the puller hooks.
- Accurate profile ribs and precise guide rails give the crosshead outstanding bending rigidity.
- The nitrided surface of the pressure spindle provides excellent sliding properties and does not require additional oiling.
Produkt-Varianten
| Product no. | Size | External hex drive (mm) | Number of hooks | Hook width | max. load | Clamping depth mm | Clamping width | Spindle thread size | Hook base width mm (b) | Hook base depth mm (c) | Thickness of hook base tip mm (a) | Weight | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 71025101 | 1 | 19 mm | 2 | 20/24 mm | 5 t | 130 mm | 160 mm | M18 x 1,5 x 170 | 24 mm | 12 mm | 3 mm | 2000 g | Jetzt entdecken |
| 71025102 | 2 | 19 mm | 2 | 20/24 mm | 5 t | 170 mm | 220 mm | M18 x 1,5 x 170 | 24 mm | 12 mm | 3 mm | 2300 g |
Eigenschaften
- two-armed
- for pulling off gears, pulleys, ball bearings etc.
- nitrided spindle, no oiling necessary - maintenance-free
- One end of the hook is narrow (20 mm wide) for tight spaces
- The other end of the hook is wide (24 mm wide) with a slot (8 mm), so that discs or gears can be pulled off with the aid of 8 mm screws
Pull-off hooks can be used on both sides:
Produkt-Highlights
For improved safety.
Excellent running characteristics of the thread itself thanks to high-grade hardening and tempering and the special coatings on the thrust spindles.
Protection against damage.
To prevent damage to shafts, the centre is fitted in a freely-swivelling mount.
In unserem Kundenportal bieten wir weitere Informationen und Downloads.
