Produkt-Varianten

Eigenschaften

• for service and maintenance work on agricultural, construction and commercial vehicles
• metric dimensions
• extra-long spanners and levers
• spanners with extra-large jaw and ring widths
• in a robust, mobile workbench
• workbench with three-stage safety concept:

1. central locking by lateral cylinder lock with fold-down key
2. single locking prevents unintentional opening during travel
3. tilt protection - simultaneous removal of several drawers not possible

• 7 easily removable drawers with full extension and ball cage guide
• oil and acid-resistant wheels (Ø 125 mm) with thread guard to protect the bearings from dirt and threads, with two parking brakes
• body RAL 7016, drawers RAL 9005 in robust industrial powder coating
• with Tool Control System (TCS)

Content 238 pieces:

1 workbench, anthracite No. WB625: 7 drawers

96830288 TCS 1 2700/159

23 sockets 1/2" with hex No. 52: 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 23; 24; 25; 26; 27; 28; 30; 32; 34; 36 mm

10 INHEX screwdriver sockets 1/2" No. 54: 4; 5; 6; 7; 8; 10; 12; 14; 17; 19 mm

3 screwdriver bits 1/2" for TORX® No. 54 TX: T20; T25; T27

5 screwdriver bits 1/2" for TORX® No. 1054 TX: T30; T45; T50; T55; T60

11 sockets with hex 1/4 No. 40: 5; 5.5; 6; 7 ;8; 9 ;10; 11;12; 13; 14 mm

4 screwdriver sockets for hex socket screws 1/4" No. 44 K: 4; 5; 6; 8 mm

6 screwdriver bits for TORX® 1/4" No. 44 KTX: T8; T9; T10; T15; T20; T25

1 enlarger No. 410: 1/4 to 1/2"

1 bit holder 1/4" No. 412: L. 25 mm

1 bit connector 1/4" No. 3116: L. 25 mm

1 bit ratchet screwdriver 1/4" No. 4008-1: L. 250 mm

1 telescopic ratchet 1/2" No. 516: L. 410-630 mm

1 QuickRelease T-handle No. 506QR: L. 300 mm

2 QuickRelease extensions 1/2" No. 509QR: L. 130; 255 mm

1 QuickRelease universal joint 1/2" No. 510QR: L. 80 mm

1 QuickRelease fine-tooth ratchet 1/4" No. 415QR N: L. 117 mm

1 QuickRelease drive handle1/4" No. 400QR: L. 150 mm

2 QuickRelease extensions 1/4" No. 405QR: L. 54; 150 mm

1 QuickRelease T-handle 1/4" No. 404QR: L. 116 mm

1 QuickRelease universal joint 1/4" No. 407QR: L. 45 mm

1 bit fine-tooth ratchet 1/4" No. 415SGB N: L. 117 mm

1 QuickRelease fine-tooth ratchet 3/8"No. 435QR N: L. 193 mm

1 QuickRelease extensions 3/8" No. 427QR: L. 160 mm

1 enlarger No. 432: 1/2 to 3/8"

1 reducer No. 431: 1/4 to 3/8"

1 car test lamp No. 12905: 6-12 and 24V

1 set of hex keys for socket head screws No. 10765/9: 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

2 hex keys for socket head screws No. 10765: 12; 14 mm

1 Set of hex keys for TORX® screws No. 10766/8: T9; T10; T15; T20; T25; T27; T30; T40

1 bit set No. 1206: 1 bit holder | L. 25 mm: SL4;5;6 mm (2x) | PH1;2;3 (3x) | PZ1;2;3 (3x) | T10;15;20;25;27;30;40 (2x) | T BO10;15;20;25;27;30;40 | INHEX 3;4;5 mm | L. 75 mm: SL6 mm | PH2;3 | PZ1;2 | T20;25 | 56-parts

96830289 TCS 2 2700/23

3 pin punches, octagonal No. 108: 4; 6; 8 mm

1 centre punch, octagonal No. 105: 120 x 12 mm

4 pin punchesNo. 108: 2; 3; 5; 10 mm

1 locksmith's hammer No. 10961: 500 g

1 flat chisel No. 102: W.23 mm L. 200 mm

1 soft-face mallet No. 10959: D.50 mm

1 cross chisel No. 103: L. 200 mm

1 locksmith's hammer No. 10961: 1500 g

1 seal scraper No. 12718: L. 265 mm

1 pry bar No. 11007: L. 400 mm

1 magnetic lifter No. 12600: 3000 g

1 roller tape measure No. 12935/5: L. 5 m

1 flat file No. 12036: L. 250 mm

1 half-round file No. 12030: L. 260 mm

1 round file No. 12025: L. 210 mm

1 precision feeler gauge, 20 sheets No. 11095/20: 0.05; 0.10; 0.15; 0.20; 0.25; 0.30; 0.35; 0.40; 0.45; 0.50; 0.55; 0.60; 0.65; 0.70; 0.75; 0.80; 0.85; 0.90; 0.95; 1.00 mm

1 open-ended spanner No. 4025 12: L. 309 mm

1 wire brush No. 12374: L. 290 mm

96830290 TCS 3 2700/22

22 combination spannersNo. 14: 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32; 36 mm

96830291 TCS 4 2700/20

1 caliper No. 12900N: 150 mm/6"

1 PHILLIPS® screwdriver No. 4734: PH2

1 slotted screwdriver No. 4724: 1.0 x 5.5 x 25 mm

1 cable knife No. 12320: Blade l. 90 mm

6 TORX® screwdrivers No. 4650: T10; T15; T20; T25; T30; T40

3 PHILLIPS® screwdrivers with impact cap DRALL+ No. 4632SK: PH1; PH2; PH3

4 slotted screwdrivers No. 4622SK: 0.8 x 4.0 x 90; 1.0 x 5.5 x 100; 1.2 x 6.5 x 125; 1.2 x 8.0 x 150 mm

1 PHILLIPS® screwdriver No. 4632: PH4

1 torch No. 13132: 130 lm

1 wooden folding rule No. 13111: L. 2 m

96830292 TCS 5 2700/14

2 circlip pliers for inner rings No. 6543: J1; J2; straight; L. 140; 180 mm

2 circlip pliers for inner rings No. 6545: A1; A2 straight; L. 140; 180 mm

2 circlip pliers for inner rings No. 6544: J11; J21; L. 128, 170 mm

2 circlip pliers for outer rings No. 6546: A11; A21; L. 128; 175 mm

1 side cutter No. 6720: L. 160 mm

1 water pump pliers No. 6572: L. 240 mm

1 flat round nose pliers No. 6529: L. 160 mm

1 combination pliers No. 6700: L. 180 mm

1 wire stripper: max. 4 mm²

1 crimping pliers No. 6638: L. 220 mm

Produkt-Highlights