Torque wrenches Service MANOSKOP®
Torque wrenches Service MANOSKOP®
730Na
Artikel-Nr. 50581010|EAN 4018754139576
- Robuster, wartungsarmer mechanischer Drehmomentschlüssel für den kontrollierten Schraubanzug.
- Beim Auslösen entsteht ein starker haptischer und akustischer „Klick“ (Doppel-Stopp-Signal).
- Mühelose und präzise Einstellung und Fixierung des Sollmomentes erfolgt über einen Drehknopf am Griffende.
- Verschleißarmes Auslösesystem mit Biegestab gewährleistet dauerhaft korrekte und sichere Messergebnisse.
- Schnelles Justieren von außen ohne Demontage möglich.
Produktvideo
Produkt-Varianten
| Product no. | Size | Model | Tool holder size [internal square] | Measuring range ft-lb | Measuring range in-lb | Fine scale division | Scale division ft-lb | Scale division in-lb | Length mm (L) | Width mm (b) | Height mm (h) | LF | SF | Weight (g) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 50581005 | a/5 | 730Na | 9 x 12 mm | 7-37 ft·lb | 90-450 in·lb | 2,5 in·lb | 1 ft·lb | 50 in·lb | 330 mm | 28 mm | 23 mm | 280,5 mm | 17,5 mm | 831 g | Jetzt entdecken |
| 50581010 | a/10 | 730Na | 9 x 12 mm | 15-75 ft·lb | 180-900 in·lb | 5 in·lb | 2,5 ft·lb | 100 in·lb | 386 mm | 28 mm | 23 mm | 336 mm | 17,5 mm | 988 g | |
| 50581020 | a/20 | 730Na | 14 x 18 mm | 30-150 ft·lb | 350-1800 in·lb | 10 in·lb | 5 ft·lb | 100 in·lb | 467 mm | 28 mm | 23 mm | 424,5 mm | 25 mm | 1264 g | Jetzt entdecken |
| 50581040 | a/40 | 730Na | 14 x 18 mm | 60-300 ft·lb | 800-3600 in·lb | 2 ft·lb | 20 ft·lb | 100 in·lb | 607 mm | 28 mm | 23 mm | 564,5 mm | 25 mm | 1655 g | Jetzt entdecken |
| 50581102 | a/2 | 730Na | 9 x 12 mm | 3-15 ft·lb | 40-180 in·lb | 2 in·lb | 0,5 ft·lb | 10 in·lb | 275 mm | 28 mm | 23 mm | 226 mm | 17,5 mm | 737 g | Jetzt entdecken |
Technologien und Leistungsmerkmale
QuickRelease
The QuickRelease safety lock prevents unintentional loss of sockets and insert tools. These click securely into place, and are only released again at the push of a button for a quick tool change.
In transducers: The QuickRelease safety lock helps you to quickly mount
and change transducers. The transducers lock into the calibration system and only unlock again at the push of the buttons.
Low-wear bending beam system
Our torque wrench is equipped with a low-wear release system with a bending beam. Unlike conventional torque wrenches with coiled springs, the bending beam is not subjected to any load until the tool is in operation, which means that resetting to '0' is not necessary after use.
2-component handle
Our 2-component handle is non-slip and ergonomically designed. It is resistant to the most common oils, greases, fuels, brake fluids, and Skydrol. The arrow markings on the handle indicate the direction of operation.
DIN EN ISO 6789-2
Our torque wrenches and torque screwdrivers are professionally calibrated in accordance with DIN EN ISO 6789-2 and delivered with a corresponding calibration certificate. We also calibrate angle-controlled torque wrenches in accordance with VDI 2648-2. This ensures the accuracy and traceability of our tools.
QuickSelect
Lightning-fast target value setting: Unlock the adjustment knob, set the value, and lock the knob again.
Eigenschaften
- clicking type with dual stop signal
- no reset to "0" required
- the measuring element is only under load when a force is applied
- mount for interchangeable insert tools
- with QuickRelease safety lock
- fast, precise adjustment with QuickSelect quick adjustment
- dual scale ft·lb/in·lb
- clicking mechanism insensitive to continuous loads and counter-loads (up to the max. measurement range of the torque wrench)
- counter-clockwise tightening by turning the insert tools over
- optimal calibration with perfectControl® calibration systems No. 7794 or calibration systems No. 7706, 7791
- easy adjustment without disassembly via 2 external adjustment screws
- with 2-component handle
- calibration certificate in accordance with DIN EN ISO 6789-2:2017
- accuracy ± 3% (size a/2: 4%)
Produkt-Highlights
Reliable handling.
The haptic feedback and a clearly audible 'click' as a dual stop signal from the mechanical trigger reliably indicate that the target value has been reached.
Precise torque in an instant.
The main and fine scale with fixed values enables quick, easy, and precise adjustment via the adjustment wheel - for maximum reliability in every application.
Maximum safety.
The clicking mechanism of our torque wrench is insensitive to further and counter loads - even up to the maximum measuring range limit. This protects both the tool and the workpieces from damage and ensures precision and durability, even with higher forces.
Adjustment does not require disassembly.
Quick adjustment from outside, no disassembly of the torque wrench required, with 2 adjustment points for the maximum & minimum values.
In unserem Kundenportal bieten wir weitere Informationen und Downloads.
Company
Service
2026© All Rights Reserved