Torque wrenches Service MANOSKOP® (N·m)
Torque wrenches Service MANOSKOP® (N·m)
730 Quick
Artikel-Nr. 50184002|EAN 4018754292653
Produktvideo
Produkt-Varianten
| Product no. | Size | Model | Tool holder size [internal square] | Measuring range N·m | Scale division N·m | Length mm (L) | Width mm (b) | Height mm (h) | LF | SF | Weight (g) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 50184001 | 2-1 | 730 Quick | 9 x 12 mm | 2-10 N·m | 0,25 N·m | 179 mm | 27,5 mm | 23,6 mm | 157,2 mm | 17,5 mm | 315 g | Jetzt entdecken |
| 50184002 | 2 | 730 Quick | 9 x 12 mm | 4-20 N·m | 0,5 N·m | 179 mm | 27,5 mm | 23,6 mm | 157,2 mm | 17,5 mm | 315 g | |
| 50184004 | 4 | 730 Quick | 9 x 12 mm | 8-40 N·m | 1 N·m | 223 mm | 27,5 mm | 23,6 mm | 200,8 mm | 17,5 mm | 395 g | Jetzt entdecken |
Technologien und Leistungsmerkmale
Low-wear bending beam system
Our torque wrench is equipped with a low-wear release system with a bending beam. Unlike conventional torque wrenches with coiled springs, the bending beam is not subjected to any load until the tool is in operation, which means that resetting to '0' is not necessary after use.
2-component handle
Our 2-component handle is non-slip and ergonomically designed. It is resistant to the most common oils, greases, fuels, brake fluids, and Skydrol. The arrow markings on the handle indicate the direction of operation.
DIN EN ISO 6789-2
Our torque wrenches and torque screwdrivers are professionally calibrated in accordance with DIN EN ISO 6789-2 and delivered with a corresponding calibration certificate. We also calibrate angle-controlled torque wrenches in accordance with VDI 2648-2. This ensures the accuracy and traceability of our tools.
QuickSelect
Lightning-fast target value setting: Unlock the adjustment knob, set the value, and lock the knob again.
Eigenschaften
- clicking type with dual stop signal
- no reset to "0" required
- the measuring element is only under load when a force is applied.
- mount for interchangeable insert tools
- with QuickRelease safety lock
- non-slip adjuster with thumb recess for quick torque adjustment
- fine, tapered pointers
- counter-clockwise tightening by turning the insert tool over
- clicking mechanism insensitive to continuous loads and counter-loads (up to the max. measurement range of the torque wrench)
- optimal calibration with perfectControl® calibration systems No. 7794 or calibration systems No. 7706, 7791
- easy adjustment without disassembly via 2 external adjustment screws
- with 2-component handle
- calibration certificate in accordance with DIN EN ISO 6789-2:2017
- accuracy ± 4%
Produkt-Highlights
Quick Adjustments, Easy
Protected against accidental changes, yet instantly unlocked at the push of a button and ready for setting the target torque: the quick adjust scale of the MANOSKOP® 730 Quick is as safe as it is efficient and precise.
Adjustment does not require disassembly.
Quick adjustment from outside, no disassembly of the torque wrench required, with 2 adjustment points for the maximum & minimum values.
Compact Lightweight
At just 197 mm in size 2 and 223 mm in size 4, the MANOSKOP® 730 Quick fits virtually anywhere, makes working in tight spaces easier, and impresses with its low weight.
In unserem Kundenportal bieten wir weitere Informationen und Downloads.
Company
Service
2026© All Rights Reserved