Service MANOSKOP® torque wrenches

Image

Produkt-Varianten

Art. no.SizeModelMeasuring range N·mMeasuring range ft·lbMA N·mNominal value N·mLength mm (L)Width mm (b)Height mm (h)Fine scale divisionSize square socket [internal square drive]LFSFWeightScale division N·mScale division ft·lb
501810055730N10-50 N·m7-37 ft·lb10 N·m50 N·m330 mm28 mm23 mm0,25 N·m9 x 12 mm280,5 mm17,5 mm831 g5 N·m1 ft·lb
Jetzt entdecken
5018101010730N20-100 N·m15-75 ft·lb20 N·m100 N·m386 mm28 mm23 mm0,5 N·m9 x 12 mm336 mm17,5 mm988 g10 N·m2,5 ft·lb
5018101212730N25-130 N·m20-95 ft·lb25 N·m130 N·m421 mm28 mm23 mm0,5 N·m14 x 18 mm379 mm25 mm1128 g10 N·m2,5 ft·lb
Jetzt entdecken
5018102020730N40-200 N·m30-150 ft·lb40 N·m200 N·m467 mm28 mm23 mm1 N·m14 x 18 mm424,5 mm25 mm1264 g10 N·m5 ft·lb
Jetzt entdecken
5018104040730N80-400 N·m60-300 ft·lb80 N·m400 N·m607 mm28 mm23 mm2 N·m14 x 18 mm564,5 mm25 mm1655 g20 N·m10 ft·lb
Jetzt entdecken
5018106565730N130-650 N·m100-480 ft·lb130 N·m650 N·m890 mm30,6 mm25,6 mm2,5 N·m14 x 18 mm848 mm25 mm3231 g50 N·m20 ft·lb
Jetzt entdecken
5018108080730N160-800 N·m120-600 ft·lb160 N·m800 N·m1178 mm30,6 mm25,6 mm5 N·m22 x 28 mm1167 mm55 mm4825 g100 N·m25 ft·lb
Jetzt entdecken
50181100100730N200-1000 N·m150-750 ft·lb200 N·m1,000 N·m1363 mm30,6 mm25,6 mm5 N·m22 x 28 mm1352 mm55 mm5000 g100 N·m25 ft·lb
Jetzt entdecken
Jetzt entdecken

Technologien und Leistungsmerkmale

Factory calibration certificate (ISO calibration)

Our torque tools, transducers, and test equipment are delivered with a factory calibration certificate in accordance with DIN EN ISO 6789-2:2017, and based on DKD-R 10-8 for traceability of the measuring equipment.

Low-wear flexible rod system

Our torque wrench is equipped with a low-wear trigger system with a bending beam. Unlike conventional torque wrenches with coiled springs, the flexible rod is not preloaded in unloaded state, which means that the 'spring' does not need to be reset to '0' after use.

QuickRelease

The QuickRelease safety lock prevents unintentional loss of insert tools. These click securely into place, and are only released again at the push of a button for a quick tool change.

2-component handle

Our 2-component handle is non-slip and ergonomically designed. It is resistant to the most common oils, greases, fuels, brake fluids, and Skydrol. The arrow markings on the handle indicate the direction of operation.

Eigenschaften

    • tactile with dual stop signal
    • no reset to '0' required
    • the measuring element is only under load when a force is applied
    • with holder for interchangeable insert tools
    • with QuickRelease safety lock
    • dual scale N·m/ft·lb
    • triggering mechanism insensitive to continuous loads and counter-loads (up to the max. measurement range of the torque wrench)
    • counter-clockwise tightening by flipping the insert tools over
    • calibration with perfectControl® calibration device No. 7791, 7794 or calibration system No. 7706
    • easy adjustment without disassembly via 2 external adjustment screws
    • supplied in a textile bag (from size 65)
    • with 2-component handle
    • calibration certificate in accordance with DIN EN ISO 6789-2:2017
    • accuracy ± 3%

Produkt-Highlights

Adjustment does not require disassembly.

Quick adjustment from outside, no disassembly of the torque wrench required, with two adjustment points for the maximum & minimum values.

Triggering dual stop signal.

When the target torque is reached, MANOSKOP® 730N provides a noticeable tactile dual stop signal.

Clear fine adjustment.

The easy-to-use and easy-to-read double scale in N·m/ft·lb allows precise and easy target torque adjustment for reliable and accurate application.

Downloads

Bedienungsanleitung: 91979802-ba-manoskop-730n-multilingual.pdf
PDF | 9.31 MB
Kurzanleitung: stw-ka- 730n-en-web.pdf
PDF | 2.25 MB
Produktdatenblatt: STAHLWILLE_50181010_730N-10_en.pdf
PDF | 0.61 MB
In unserem Kundenportal bieten wir weitere Informationen und Downloads.

Zubehör-Artikel.