Torque wrenches Standard MANOSKOP®
Torque wrenches Standard MANOSKOP®
721QR Quick
Artikel-Nr. 50204120|EAN 4018754268962
- Quick adjustment thanks to easy-to-operate locking lever in handle.
- Efficient. No reset to '0' required, as the measuring element is only under load when a force is applied.
- Ergonomically shaped, non-slip adjuster with thumb recess and ergonomic handle for fatigue-free work.
- Triggering torque wrench with permanently installed 1/2" QuickRelease ratchet, double stop signal (tactile and audible), left-hand tightening by flipping over the insert tool.
- With calibration certificate, accuracy ± 4%.
Produkt-Varianten
| Art. no. | Size | Model | Measuring range N·m | Measuring range ft·lb | MA N·m | Nominal value N·m | External square drive (inch) | Length mm (L) | b1 | b2 | Height mm (h1) | Height mm (h2) | LF | Weight | Scale division N·m | Scale division ft·lb | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 50204115 | 15 | 721QR Quick | 30-150 N·m | 25-110 ft·lb | 30 N·m | 150 N·m | 1/2 | 452,5 mm | 28 mm | 41 mm | 23 mm | 18 mm | 387 mm | 1268 g | 5 N·m | 5 ft·lb | Jetzt entdecken |
| 50204120 | 20 | 721QR Quick | 40-200 N·m | 30-145 ft·lb | 40 N·m | 200 N·m | 1/2 | 482 mm | 28 mm | 41 mm | 23 mm | 18 mm | 416,5 mm | 1338 g | 5 N·m | 5 ft·lb |
Technologien und Leistungsmerkmale
QuickRelease
The QuickRelease safety lock prevents unintentional loss of insert tools. These click securely into place, and are only released again at the push of a button for a quick tool change.
Factory calibration certificate (ISO calibration)
Our torque tools, transducers, and test equipment are delivered with a factory calibration certificate in accordance with DIN EN ISO 6789-2:2017, and based on DKD-R 10-8 for traceability of the measuring equipment.
2-component handle
Our 2-component handle is non-slip and ergonomically designed. It is resistant to the most common oils, greases, fuels, brake fluids, and Skydrol. The arrow markings on the handle indicate the direction of operation.
Eigenschaften
- tactile with dual stop signal
- Quick adjustment thanks to easy-to-operate locking lever in handle.
- with permanently installed QuickRelease ratchet
- 36 teeth
- with QuickRelease safety lock
- no reset to '0' required
- the measuring element is only under load when a force is applied.
- dual scale N·m/ft·lb
- non-slip adjuster with thumb recess for quick torque adjustment
- triggering mechanism insensitive to continuous loads and counter-loads (up to the max. measurement range of the torque wrench)
- calibration with perfectControl® calibration system No. 7794, or calibration system No. 7791 or 7706.
- easy adjustment without disassembly via 2 external adjustment screws
- for controlled clockwise tightening
- with 2-component handle
- calibration certificate in accordance with DIN EN ISO 6789-2:2017
- accuracy ± 4%
Produkt-Highlights
Rapid adjustment.
Easy and quick adjustment of the torque is carried out by an easy-to-operate clamping lever in the handle. The scale can be moved quickly and safely with an ergonomically shaped, non-slip adjustment element with thumb recess.
Adjustment does not require disassembly.
Quick adjustment from outside, no disassembly of the torque wrench required, with two adjustment points for the maximum & minimum values.
In unserem Kundenportal bieten wir weitere Informationen und Downloads.
Service
2025© All Rights Reserved