Torque wrenches Service MANOSKOP®
Torque wrenches Service MANOSKOP®
730N
Artikel-Nr. 50181010|EAN 4018754139521
- Robuster, wartungsarmer mechanischer Drehmomentschlüssel für den kontrollierten Schraubanzug.
- Beim Auslösen entsteht ein starker haptischer und akustischer „Klick“ (Doppel-Stopp-Signal).
- Mühelose und präzise Einstellung und Fixierung des Sollmomentes erfolgt über einen Drehknopf am Griffende.
- Verschleißarmes Auslösesystem mit Biegestab gewährleistet dauerhaft korrekte und sichere Messergebnisse.
- Schnelles Justieren von außen ohne Demontage möglich.
Produkt-Varianten
| Product no. | Model | Size | Tool holder size [internal square] | Measuring range N·m | Measuring range ft-lb | MA N·m | Nominal value N·m | Scale division N·m | Scale division ft-lb | Fine scale division | Length mm (L) | Width mm (b) | Height mm (h) | LF | SF | Weight (g) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 50181005 | 730N | 5 | 9 x 12 mm | 10-50 N·m | 7-37 ft·lb | 10 N·m | 50 N·m | 5 N·m | 1 ft·lb | 0,25 N·m | 330 mm | 28 mm | 23 mm | 280,5 mm | 17,5 mm | 831 g | Jetzt entdecken |
| 50181010 | 730N | 10 | 9 x 12 mm | 20-100 N·m | 15-75 ft·lb | 20 N·m | 100 N·m | 10 N·m | 2,5 ft·lb | 0,5 N·m | 386 mm | 28 mm | 23 mm | 336 mm | 17,5 mm | 988 g | |
| 50181012 | 730N | 12 | 14 x 18 mm | 25-130 N·m | 20-95 ft·lb | 25 N·m | 130 N·m | 10 N·m | 2,5 ft·lb | 0,5 N·m | 421 mm | 28 mm | 23 mm | 379 mm | 25 mm | 1128 g | Jetzt entdecken |
| 50181020 | 730N | 20 | 14 x 18 mm | 40-200 N·m | 30-150 ft·lb | 40 N·m | 200 N·m | 10 N·m | 5 ft·lb | 1 N·m | 467 mm | 28 mm | 23 mm | 424,5 mm | 25 mm | 1264 g | Jetzt entdecken |
| 50181040 | 730N | 40 | 14 x 18 mm | 80-400 N·m | 60-300 ft·lb | 80 N·m | 400 N·m | 20 N·m | 10 ft·lb | 2 N·m | 607 mm | 28 mm | 23 mm | 564,5 mm | 25 mm | 1655 g | Jetzt entdecken |
| 50181065 | 730N | 65 | 14 x 18 mm | 130-650 N·m | 100-480 ft·lb | 130 N·m | 650 N·m | 50 N·m | 20 ft·lb | 2,5 N·m | 890 mm | 30,6 mm | 25,6 mm | 848 mm | 25 mm | 3231 g | Jetzt entdecken |
| 50181080 | 730N | 80 | 22 x 28 mm | 160-800 N·m | 120-600 ft·lb | 160 N·m | 800 N·m | 100 N·m | 25 ft·lb | 5 N·m | 1178 mm | 30,6 mm | 25,6 mm | 1167 mm | 55 mm | 4825 g | Jetzt entdecken |
| 50181100 | 730N | 100 | 22 x 28 mm | 200-1000 N·m | 150-750 ft·lb | 200 N·m | 1,000 N·m | 100 N·m | 25 ft·lb | 5 N·m | 1363 mm | 30,6 mm | 25,6 mm | 1352 mm | 55 mm | 5000 g | Jetzt entdecken |
| 50181365 | 730N | II/65 | 22 x 28 mm | 130-650 N·m | 100-480 ft·lb | 130 N·m | 650 N·m | 50 N·m | 20 ft·lb | 2,5 N·m | 911 mm | 30,6 mm | 25,6 mm | 900 mm | 55 mm | 3504 g | Jetzt entdecken |
Technologien und Leistungsmerkmale
QuickRelease
The QuickRelease safety lock prevents unintentional loss of insert tools. These click securely into place, and are only released again at the push of a button for a quick tool change.
In transducers: The QuickRelease safety lock helps you to quickly mount
and change transducers. The transducers lock into the calibration system and only unlock again at the push of the buttons.
QuickSelect
Lightning-fast target value setting: Unlock the adjustment knob, set the value, and lock the knob again.
Low-wear bending beam system
Our torque wrench is equipped with a low-wear release system with a bending beam. Unlike conventional torque wrenches with coiled springs, the bending beam is not subjected to any load until the tool is in operation, which means that the spring does not need to be reset to '0' after use.
2-component handle
Our 2-component handle is non-slip and ergonomically designed. It is resistant to the most common oils, greases, fuels, brake fluids, and Skydrol. The arrow markings on the handle indicate the direction of operation.
DIN EN ISO 6789-2
Our torque wrenches and torque screwdrivers are professionally calibrated in accordance with DIN EN ISO 6789-2 and delivered with a corresponding calibration certificate. We also calibrate angle-controlled torque wrenches in accordance with VDI 2648-2. This ensures the accuracy and traceability of our tools.
Eigenschaften
- clicking type with dual stop signal
- no reset to '0' required
- the measuring element is only under load when a force is applied
- with holder for interchangeable insert tools
- with QuickRelease safety lock
- dual scale N·m/ft·lb
- clicking mechanism insensitive to continuous loads and counter-loads (up to the max. measurement range of the torque wrench)
- counter-clockwise tightening by turning the insert tools over
- optimal calibration with perfectControl® calibration systems No. 7794 or calibration systems No. 7706, 7791
- easy adjustment without disassembly via 2 external adjustment screws
- supplied in a textile bag (from size 65)
- with 2-component handle
- calibration certificate in accordance with DIN EN ISO 6789-2:2017
- accuracy ± 3%
Produkt-Highlights
Clicking dual stop signal.
When the target torque is reached, MANOSKOP® 730N provides a noticeable tactile dual stop signal.
The fast one.
The release torque can be adjusted quickly and efficiently in small increments. This saves valuable time, especially in situations where the torque needs to be changed frequently. With this feature, the SevenFiveZero sets new standards in terms of speed and user-friendliness.
Clear fine adjustment.
The easy-to-use and easy-to-read double scale in N·m/ft·lb allows precise and easy target torque adjustment for reliable and accurate application.
Adjustment does not require disassembly.
Quick adjustment from outside, no disassembly of the torque wrench required, with 2 adjustment points for the maximum & minimum values.
In unserem Kundenportal bieten wir weitere Informationen und Downloads.
Zubehör-Artikel.
Company
Service
2026© All Rights Reserved