96503005

Produkt-Varianten

Product no.	Size	Measuring range N·m	Measuring range ft·lb	MA N·m	Nominal value N·m	Length mm (L)	Width mm (b)	Height mm (h)	Fine scale division	Size square socket [inside square drive]	LF	SF	Weight	Weight with box	Maß-Skizze
96503005	5	10-50 N·m	7-37 ft·lb	10 N·m	50 N·m	330 mm	28 mm	23 mm	0,25 N·m	9 x 12 mm	280,5 mm	17,5 mm	828 g	1632 g
96503010	10	20-100 N·m	15-75 ft·lb	20 N·m	100 N·m	386 mm	28 mm	23 mm	0,5 N·m	9 x 12 mm	336 mm	17,5 mm	986 g	1788 g	Jetzt entdecken
96503012	12	25-130 N·m	20-95 ft·lb	25 N·m	130 N·m	421 mm	28 mm	23 mm	0,5 N·m	14 x 18 mm	379 mm	25 mm	1124 g	1928 g	Jetzt entdecken
96503020	20	40-200 N·m	30-150 ft·lb	40 N·m	200 N·m	467 mm	28 mm	23 mm	1 N·m	14 x 18 mm	424,5 mm	25 mm	1266 g	1890 g	Jetzt entdecken
96503040	40	80-400 N·m	60-300 ft·lb	80 N·m	400 N·m	607 mm	28 mm	23 mm	2 N·m	14 x 18 mm	564,5 mm	25 mm	1666 g	2444 g	Jetzt entdecken
96503065	65	130-650 N·m	100-480 ft·lb	130 N·m	650 N·m	890 mm	30.6 mm	25,6 mm	2,5 N·m	14 x 18 mm	848 mm	25 mm	3242 g	6500 g	Jetzt entdecken
96503080	80	160-800 N·m	120-600 ft·lb	160 N·m	800 N·m	1178 mm	30.6 mm	25,6 mm	5 N·m	22 x 28 mm	1167 mm	55 mm	4794 g	10500 g	Jetzt entdecken
96503100	100	200-1000 N·m	150-750 ft·lb	200 N·m	1,000 N·m	1363 mm	30.6 mm	25,6 mm	5 N·m	22 x 28 mm	1352 mm	55 mm	5196 g	11000 g	Jetzt entdecken
96503465	II/65	130-650 N·m	100-480 ft·lb	130 N·m	650 N·m	911 mm	30.6 mm	25,6 mm	2,5 N·m	22 x 28 mm	900 mm	55 mm	3490 g	7000 g	Jetzt entdecken

Eigenschaften

For work in serial production
Adjustment knob can be unscrewed after setting the trigger torque - unintentional changing of the setpoint torque is thus prevented
The included TORX®Tamper Resistant fuse screw also protects against tampering as well as the included adhesive seals No adjustment possible without breaking the seal
Triggering
No reset to “0” required, since measuring element is only loaded during the tightening process
Mount for interchangeable bits/sockets
QuickRelease safety lock
Fast, precise adjustment with QuickSelect quick adjustment
Dual stop signal
Easy to read double scale with colour differentiation of N·m/ft·lb and ft·lb/in·lb respectively
Counter-clockwise tightening by turning the bits/sockets
Continued loading after triggering or loading against the operating direction, e.g. with screws that are stuck, does not affect the triggering mechanism, which is therefore protected from damage.
2-component handle with hand-friendly green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)
Calibration with perfectControl® calibration system No. 7794 or calibration device No. 7706. Where applicable Readjustment does not require disassembly
Certificate in accordance with DIN EN ISO 6789-2:2017
In a sturdy plastic box (size 80-100 in sturdy steel box)
Display deviation ± 3%

Produkt-Highlights

Quick adjustment from outside, no disassembly of the torque wrench required, with two adjustment points for the maximum & minimum values.

The easy-to-use and easy-to-read double scale in N·m/ft·lb allows precise and easy target torque adjustment for reliable and accurate application.

Torque wrench service MANOSKOP® with holder for insert tools