Torque wrenches Service MANOSKOP® (in·lb)
Torque wrenches Service MANOSKOP® (in·lb)
730a Quick
Artikel-Nr. 50584004|EAN 4018754292691
- Robuster, wartungsarmer mechanischer Drehmomentschlüssel für den kontrollierten Schraubanzug.
- Das Auslösen erfolgt mit einem deutlichen haptischen und akustischen Klick-Signal.
- Blitzeinstellung des Drehmoments durch den leicht zu betätigende Entriegelungsmechanik am Gehäuse.
- Dank eines langlebigen, verschleißarmes Auslösesystems mit Biegestab ist ein Rücksetzen auf „0“ nicht erforderlich.
- Schnelles Justieren von außen ohne Demontage möglich.
Produktvideo
Produkt-Varianten
| Product no. | Size | Model | Tool holder size [internal square] | Measuring range in-lb | Scale division in-lb | Length mm (L) | Width mm (b) | Height mm (h) | LF | SF | Weight (g) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 50584001 | a/2-1 | 730a Quick | 9 x 12 mm | 17,5-87,5 in·lb | 2,5 in·lb | 179 mm | 27,5 mm | 23,6 mm | 157,2 mm | 17,5 mm | 315 g | Jetzt entdecken |
| 50584002 | a/2 | 730a Quick | 9 x 12 mm | 30-175 in·lb | 5 in·lb | 179 mm | 27,5 mm | 23,6 mm | 157,2 mm | 17,5 mm | 315 g | Jetzt entdecken |
| 50584004 | a/4 | 730a Quick | 9 x 12 mm | 70-350 in·lb | 10 in·lb | 223 mm | 27,5 mm | 23,6 mm | 200,8 mm | 17,5 mm | 395 g |
Technologien und Leistungsmerkmale
Low-wear bending beam system
Our torque wrench is equipped with a low-wear release system with a bending beam. Unlike conventional torque wrenches with coiled springs, the bending beam is not subjected to any load until the tool is in operation, which means that resetting to '0' is not necessary after use.
2-component handle
Our 2-component handle is non-slip and ergonomically designed. It is resistant to the most common oils, greases, fuels, brake fluids, and Skydrol. The arrow markings on the handle indicate the direction of operation.
DIN EN ISO 6789-2
Our torque wrenches and torque screwdrivers are professionally calibrated in accordance with DIN EN ISO 6789-2 and delivered with a corresponding calibration certificate. We also calibrate angle-controlled torque wrenches in accordance with VDI 2648-2. This ensures the accuracy and traceability of our tools.
Eigenschaften
- clicking type with dual stop signal
- no reset to "0" required
- the measuring element is only under load when a force is applied
- with holder for interchangeable insert tools
- counter-clockwise tightening by turning the insert tool over
- clicking mechanism insensitive to continuous loads and counter-loads (up to the max. measurement range of the torque wrench)
- optimal calibration with perfectControl® calibration systems No. 7794 or calibration systems No. 7706, 7791
- easy adjustment without disassembly via 2 external adjustment screws
- with 2-component handle
- calibration certificate in accordance with DIN EN ISO 6789-2:2017
- accuracy ± 4%
Produkt-Highlights
Rapid adjustment.
Easy and quick adjustment of the torque is carried out by an easy-to-operate clamping lever in the handle. The scale can be moved quickly and safely with an ergonomically shaped, non-slip adjustment element with thumb recess.
Adjustment does not require disassembly.
Quick adjustment from outside, no disassembly of the torque wrench required, with 2 adjustment points for the maximum & minimum values.
Downloads
In unserem Kundenportal bieten wir weitere Informationen und Downloads.
Company
Service
2026© All Rights Reserved