Torque wrench service MANOSKOP® with holder for insert tools

Torque wrench service MANOSKOP® with holder for insert tools

730 Quick

Artikel-Nr. 50184065|EAN 4018754268894
  • Flash setting by easy-to-operate clamping lever in the handle.
  • Efficient. No resetting to "0" necessary, as measuring element is only loaded during the tightening process.
  • Ergonomically shaped, non-slip adjustment element with thumb recess and optimised ball handle for fatigue-free working.
  • Releasing torque wrench with receptacle for exchangeable plug-in tools, double stop signal (can be felt and heard), left-hand tightening by turning over the plug-in tools.
  • With calibration certificate, display deviation ± 4 %.

Produktvideo

Produkt-Varianten

Product no.SizeMeasuring range N·mMeasuring range ft·lbLength mm (L)Width mm (b)Height mm (h)Size square socket [inside square drive]LFSFWeight
5018400556-50 N·m5-36 ft·lb315 mm28 mm23 mm9 x 12 mm288 mm17,5 mm780 g
Jetzt entdecken
501840101020-100 N·m15-72,5 ft·lb370 mm28 mm23 mm9 x 12 mm343 mm17,5 mm936 g
Jetzt entdecken
501840121225-130 N·m20-95 ft·lb410 mm28 mm23 mm14 x 18 mm390 mm25 mm1074 g
Jetzt entdecken
501840202040-200 N·m30-145 ft·lb455 mm28 mm23 mm14 x 18 mm435 mm25 mm1310 g
Jetzt entdecken
501840303060-300 N·m50-220 ft·lb520 mm28 mm23 mm14 x 18 mm500 mm25 mm1400 g
Jetzt entdecken
501840404080-400 N·m60-300 ft·lb590 mm28 mm23 mm14 x 18 mm570 mm25 mm1540 g
Jetzt entdecken
5018406565130-650 N·m100-480 ft·lb875 mm30.6 mm25,6 mm14 x 18 mm855 mm25 mm3192 g
50184565II/65130-650 N·m100-480 ft·lb897 mm30.6 mm25,6 mm22 x 28 mm907 mm55 mm4104 g
Jetzt entdecken

Technologien und Leistungsmerkmale

QuickRelease

The QuickRelease safety lock prevents unintentional loss of insert tools. These click securely into place, and are only released again at the push of a button for a quick tool change.

Factory calibration certificate (ISO calibration)

Our torque tools, transducers and test equipment are delivered with a factory calibration certificate in accordance with DIN EN ISO 6789-2 and based on DKD-R 10-8 for traceability of the measuring equipment.

Low-wear flexible rod system

Our torque wrench is equipped with a low-wear trigger system with a bending beam. Unlike conventional torque wrenches with coiled springs, the flexible rod is not preloaded in unloaded state, which means that the "spring" does not need to be reset to "0" after use.

2-component handle

Our 2-component handle is non-slip and ergonomically designed. It is resistant to the most common oils, greases, fuels, brake fluids and Skydrol. The arrow markings on the handle indicate the direction of operation.

Eigenschaften

    • click-type
    • the measuring element is only under load while force is being applied, no need for manual reset to zero
    • mount for interchangeable insert/shell tools
    • QuickRelease safety lock (sizes 5–65)
    • rapid setting thanks to easy-action locking lever in the handle (sizes 5–65)
    • ergonomically designed, non-slip adjuster with a thumb recess
    • optimised convex handle for strain-free working
    • dual stop signal
    • twin scales N·m/ft·lb and N·m/in·lb (sizes 5–80)
    • on request also available as an N·m-only version without twin scale (sizes 5-65)
    • can be applied for either clockwise or anticlockwise tightening by turning the inserts over
    • any force applied to the tool after the 'click' or applied in the opposite direction to the current function – e.g. forcible loosening of a jammed screw - does not act on the trigger mechanism and cannot cause damage to it
    • calibration using perfectControl® calibrating unit No 7794 or calibration system No 7706. Readjustment does not require disassembly
    • certificate in accordance with DIN EN ISO 6789-2:2017
    • display deviation value ± 4%

Produkt-Highlights

Fast.

Rapid setting thanks to the easy-action locking lever in the handle. Ergonomically designed, non-slip adjuster with a thumb recess for fast, safe setting of the slider.

Adjustment does not require disassembly.

Quick adjustment from outside, no disassembly of the torque wrench required, with two adjustment points for the maximum & minimum values.

Protected.

The internal mechanism is extremely resistant to mechanical wear and well protected against dirt and soiling inside the outer housing.

Downloads

Bedienungsanleitung: 91979888-ba-manoskop-721-730quick-de-en-fr-es-it-jp.pdf
PDF | 2.31 MB
Kurzanleitung: 91974010-ka-skalenfenster-730quick-en.pdf
PDF | 0.26 MB
Kurzanleitung: 91979888-ka-730quick-en.pdf
PDF | 0.40 MB
Produktdatenblatt: STAHLWILLE_50184065_730-65 QUICK_en.pdf
PDF | 1.50 MB
In unserem Kundenportal bieten wir weitere Informationen und Downloads.
Newsletter
Bleib auf dem Laufenden! Jetzt abonnieren und Updates über neue Produkte, Services und Aktionen erhalten.