Torque wrench standard MANOSKOP® with fixed ratchet
Torque wrench standard MANOSKOP® with fixed ratchet
721 Quick
Artikel-Nr. 50204030|EAN 4018754268948
- Made in Germany – STAHLWILLE release torque wrench, ratchet with punch square, length 553 mm, with calibration certificate (DIN EN ISO 6789-2:2017), 50204030.
- Patented, low-wear release system with bending rod.
- Lightning-fast and precise torque adjustment.
- Continued loading after release or loading in the opposite functional direction will not damage the torque wrench.
Produkt-Varianten
| Product no. | Size | Measuring range N·m | Measuring range ft·lb | MA N·m | Nominal value N·m | External square drive (inch) | Length mm (L) | b1 | b2 | Height mm (h1) | Height mm (h2) | Number of teeth | LF | Weight | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 50204005 | 5 | 6-50 N·m | 5-36 ft·lb | 6 N·m | 50 N·m | 3/8 | 352 mm | 28 mm | 27,5 mm | 23 mm | 14,5 mm | 30 | 293 mm | 880 g | Jetzt entdecken |
| 50204015 | 15 | 30-150 N·m | 25-110 ft·lb | 30 N·m | 150 N·m | 1/2 | 452 mm | 28 mm | 41 mm | 23 mm | 18 mm | 36 | 387 mm | 1282 g | Jetzt entdecken |
| 50204020 | 20 | 40-200 N·m | 30-145 ft·lb | 40 N·m | 200 N·m | 1/2 | 483 mm | 28 mm | 41 mm | 23 mm | 18 mm | 36 | 418 mm | 1349 g | Jetzt entdecken |
| 50204030 | 30 | 60-300 N·m | 50-220 ft·lb | 60 N·m | 300 N·m | 1/2 | 553 mm | 28 mm | 44 mm | 23 mm | 27,5 mm | 36 | 486 mm | 1646 g |
Technologien und Leistungsmerkmale
Factory calibration certificate (ISO calibration)
Our torque tools, transducers and test equipment are delivered with a factory calibration certificate in accordance with DIN EN ISO 6789-2 and based on DKD-R 10-8 for traceability of the measuring equipment.
2-component handle
Our 2-component handle is non-slip and ergonomically designed. It is resistant to the most common oils, greases, fuels, brake fluids and Skydrol. The arrow markings on the handle indicate the direction of operation.
Eigenschaften
- click-type
- the measuring element is only under load while force is being applied, no need for manual reset to zero
- rapid setting thanks to easy-action locking lever in the handle
- ergonomically designed, non-slip adjuster with a thumb recess
- dual stop signal
- twin scales N·m/ft·lb
- optimised convex handle for strain-free working
- any force applied to the tool after the 'click' or applied in the opposite direction to the current function – e.g. forcible loosening of a jammed screw - does not act on the trigger mechanism and cannot cause damage to it
- all the sensitive components are protected by the sturdy tubular steel housing
- calibration using perfectControl® calibrating unit No 7794 or calibration system No 7706. Readjustment does not require disassembly
- certificate in accordance with DIN EN ISO 6789-2:2017
- display deviation value ± 4%
Produkt-Highlights
Fast.
Rapid setting thanks to the easy-action locking lever in the handle. Ergonomically designed, non-slip adjuster with a thumb recess for fast, safe setting of the slider.
Adjustment does not require disassembly.
Quick adjustment from outside, no disassembly of the torque wrench required, with two adjustment points for the maximum & minimum values.
In unserem Kundenportal bieten wir weitere Informationen und Downloads.
