Torque wrenches Service MANOSKOP®
Torque wrenches Service MANOSKOP®
730NR
Artikel-Nr. 96503120|EAN 4018754229390
Produkt-Varianten
| Product no. | Model | Size | Measuring range N·m | Measuring range ft-lb | Scale division N·m | Scale division ft-lb | Fine scale division | External square drive (inch) | Length mm (L) | b1 | b2 | Height mm (h1) | Height mm (h2) | LF | Weight (g) | Weight with box | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 96502140 | 730NR | 40 FK | 80-400 N·m | 60-300 ft·lb | 20 N·m | 10 ft·lb | 2 N·m | 3/4 | 657 mm | 28 mm | 50 mm | 23 mm | 31,5 mm | 564,5 mm | 2122 g | 2657 g | Jetzt entdecken |
| 96502265 | 730NR | 65 FK-HD | 130-650 N·m | 100-480 ft·lb | 50 N·m | 20 ft·lb | 2,5 N·m | 3/4 | 944 mm | 30,6 mm | 58 mm | 25,6 mm | 36 mm | 848 mm | 3698 g | 6188 g | Jetzt entdecken |
| 96503105 | 730NR | 5 FK | 10-50 N·m | 7-37 ft·lb | 5 N·m | 1 ft·lb | 0,25 N·m | 3/8 | 364 mm | 28 mm | 33 mm | 23 mm | 24 mm | 280,5 mm | 973 g | 1763 g | Jetzt entdecken |
| 96503110 | 730NR | 10 FK | 20-100 N·m | 15-75 ft·lb | 10 N·m | 2,5 ft·lb | 0,5 N·m | 1/2 | 420 mm | 28 mm | 33 mm | 23 mm | 24 mm | 336,5 mm | 1146 g | 1934 g | Jetzt entdecken |
| 96503120 | 730NR | 20 FK | 40-200 N·m | 30-150 ft·lb | 10 N·m | 5 ft·lb | 1 N·m | 1/2 | 513,5 mm | 28 mm | 43 mm | 23 mm | 26 mm | 425 mm | 1583 g | 2370 g |
Technologien und Leistungsmerkmale
QuickSelect
Lightning-fast target value setting: Unlock the adjustment knob, set the value, and lock the knob again.
Low-wear bending beam system
Our torque wrench is equipped with a low-wear release system with a bending beam. Unlike conventional torque wrenches with coiled springs, the bending beam is not subjected to any load until the tool is in operation, which means that the spring does not need to be reset to '0' after use.
2-component handle
Our 2-component handle is non-slip and ergonomically designed. It is resistant to the most common oils, greases, fuels, brake fluids, and Skydrol. The arrow markings on the handle indicate the direction of operation.
DIN EN ISO 6789-2
Our torque wrenches and torque screwdrivers are professionally calibrated in accordance with DIN EN ISO 6789-2 and delivered with a corresponding calibration certificate. We also calibrate angle-controlled torque wrenches in accordance with VDI 2648-2. This ensures the accuracy and traceability of our tools.
Eigenschaften
- clicking type with dual stop signal
- no reset to '0' required
- the measuring element is only under load when a force is applied
- with QuickRelease ratchet
- with QuickRelease safety lock
- fast, precise adjustment with QuickSelect quick adjustment
- dual scale N·m/ft·lb
- clicking mechanism insensitive to continuous loads and counter-loads (up to the max. measurement range of the torque wrench)
- optimal calibration with perfectControl® calibration systems No. 7794 or calibration systems No. 7706, 7791
- easy adjustment without disassembly via 2 external adjustment screws
- in sturdy plastic box (size 65 in sheet steel box)
- with 2-component handle
- calibration certificate in accordance with DIN EN ISO 6789-2:2017
- accuracy ± 4%
Produkt-Highlights
Adjustment does not require disassembly.
Quick adjustment from outside, no disassembly of the torque wrench required, with 2 adjustment points for the maximum & minimum values.
Clear fine adjustment.
The easy-to-use and easy-to-read double scale in N·m/ft·lb allows precise and easy target torque adjustment for reliable and accurate application.
Clicking dual stop signal.
When the target torque is reached, MANOSKOP® 730N provides a noticeable tactile dual stop signal.
In unserem Kundenportal bieten wir weitere Informationen und Downloads.
Company
Service
2025© All Rights Reserved