VDE MANOSKOP® torque wrench
VDE MANOSKOP® torque wrench
730 VDE
- Setting/clicking torque wrench for precise bolted joints in the torque range of 10-50 N·m.
- Protective insulation makes it possible to work under voltages up to 1,000 volts safely and efficiently; certified according to strict VDE standards.
- Proven QuickSelect rapid torque adjustment and secondary fine scale for fine adjustment.
- Clicking system with flexible rod - for a consistently correct and reliable measurement result with minimal time expenditure.
- Quick adjustment of the setting scale possible from the outside without disassembling the torque wrench.
Produkt-Varianten
| Product no. | Model | Tool holder size [internal square] | Measuring range N·m | Measuring range ft-lb | MA N·m | Nominal value N·m | Scale division N·m | Fine scale division | Length mm (L) | b1 | b2 | Height mm (h1) | Height mm (h2) | LF | SF | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 55010025 | 730 VDE | 9 x 12 mm | 4-25 N·m | 4 N·m | 25 N·m | - mm | Jetzt entdecken | |||||||||
| 55010050 | 730 VDE | 9 x 12 mm | 10-50 N·m | 7-37 ft·lb | 10 N·m | 50 N·m | 5 N·m | 0,25 N·m | 390,5 mm | 43 mm | 36 mm | 308,5 mm | 28 mm |
Technologien und Leistungsmerkmale
DIN EN ISO 6789-2
Low-wear bending beam system
QuickRelease
QuickSelect
Eigenschaften
- tactile dual stop signal
- QuickRelease safety lock
- fast, precise adjustment with QuickSelect quick adjustment
- double insulation allows to work at voltages of up to 1,000 while compliant with VDE (in line with IEC 60900)
- the insulation is madefrom glass fibre-reinforced polyamide plastic, which is resistant to fluids that often occur in working environments, such as alkaline solutions, fuels or oils
- easy to read double scale with colour differentiation of N·m/ft·lb
- no reset to "0" required, since measuring element is only loaded during tightening
- low-wear triggering mechanism
- readjustment without disassembly and without checking the insulation again
- calibration certificate in accordance with DIN EN ISO 6789-2:2017
- display deviation ± 3%
Produkt-Highlights
Adjustment does not require disassembly.
The VDE torque wrenches have two setting points for the upper and lower value, which allows for easy adjustment from the outside without requiring disassembly of the tool. This also means there is no need to check the insulation again.
Triggering dual stop signal.
The MANOSKOP® provides a clearly noticeable dual stop signal when the set value is reached.
Precise fine adjustment.
Thanks to QuickSelect, the target torque can be set in no time at all - and with extreme precision, as it can be read off the additional scale ring in particularly fine increments.
Exchangeable ratchet adaptor.
The STAHLWILLE MANOSKOP® 730R VDE is the only insulated torque wrench on the market where the insert ratchet (9 x 12 mm, 3/8") can be replaced without the need for a new insulation test thanks to a mount for interchangeable insert tools (9 x 12 mm, 3/8").
Insulating plastic sheath.
The special plastic sheath of the MANOSKOP® 730R VDE reliably protects up to 1,000 volts. It is also non-slip, abrasion-resistant and resistant to diluted alkaline solutions, hydrocarbons, fuels and oils.
