Produkt-Varianten

Eigenschaften

Contents 206-pcs:

11 sockets 1/4" No. 40: 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm

5 sockets 1/4" No. 40TX: E4; E5; E6; E7; E8

7 screwdriver bits 1/4" for for internal TORX® screws No.44 KTXB; T10; T15; T20; T25; T27; T30; T40

3 extension No. 405 6.3 mm (1/4") L.54; 100; 150 mm

1 bit holder 1/4" No. 412: L.25 mm

12 bits TORX® 1/4" No. 1410-1421: T6; T7; T8; T9; T10; T15; T20; T25; T27; T30; T40; T45

16 sockets with hexagon 3/8" No. 456: 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22 mm

3 sockets 3/8" No. 45TX: E10; E12; E14

3 INHEX sockets 3/8" No. 49: 5; 6; 7 mm

3 screwdriver sockets for internal TORX® screws 3/8" No. 49TX: T30; T40; T45

1 QuickRelease crank 3/8" No. 453QR: L.408 mm

3 Extensions 3/8" No. 427: L.76. ; 160; 240 mm

17 sockets 1/2" No. 52: 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm

6 sockets 1/2" for outside TORX® screws No. 50TX: E11; E12; E14; E18; E20; E24

2 sockets 1/2" No. 2309IMP K: 17; 19 mm

5 INHEX sockets 1/2" No. 54: 8; 10; 12; 14; 17 mm

4 screwdriver sockets 1/2" No. 54TX: T45; T50; T55; T60

1 QuickRelease cross handle 1/2" No. 506QR: L.300 mm

3 extensions 1/2" No. 509: 75; 130; 255 mm

1 QR fine-tooth ratchet 1/2" No. 512QR: L.265.5 mm

6 pin punches No. 108 D.2, 3, 4, 5, 6, 8 mm

1 flat chisel No. 102/150 W.18 mm L.150 mm

1 Centre punch No. 105 L.120 mm

1 Cross chisel No. 103: L.150 mm

1 Measuring tape No. 12935: L.3 m

1 Soft face hammer No. 10959: D.40 mm

1 Locksmith's hammer No.10961 500g with ash handle

1 Magnetic lifter No. 12600: 500 g

1 Cable knife No. 12320 Blade-l.90 mm

1 Telescopic mirror No. 12921 M 2 1/4 INCH / D. 57 mm

1 Rod light No. 13132: 130 lm

2 Batteries AAA 1,5 V

1 Brake caliper brush No. 12373: L.230 mm

1 Claw gripper No. 12922E: D.6 mm L.540 mm

8 double-ended ring spanners No. 20: 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17; 18 x 19; 20 x 22 mm

1 slotted screwdriver w.impact cap No. 4622SK 5 1.2 x 10 x 175mm 3K handle

1 triangular spoon scraper No. 10676: 85 x 12 x 315 mm

1 pry bar No. 12770:L. 260mm

1 gasket scraper No. 12718: L. 265 mm

1 Ballpoint angle screwdriver set No. 10767/9: 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

1 Grip pliers No. 6564: L.250 mm

1 PHILLIPS® screwdriver DRALL® No. 4744: PZ2

1 PHILLIPS® screwdriver DRALL® No. 4734: PH2

1 Slotted screwdriver No. 4724: 0.6 x 3.5 x 25 mm

23 Combination spanners No. 13: 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 23; 24; 27; 29; 30; 32 mm

11 Double open-ended spanners No. 10: 6 x 7; 8 x 9; 10 x 11; 10 x 12; 10 x 13; 13 x 14; 14 x 15; 16 x 17; 18 x 19; 20 x 22; 21 x 24

4 double-ended ring spanners No. 21TX: E6 x E8; E10 x E12; E14 x E18; E20 x E24

4 slotted screwdrivers No. 4620: 0.6 x 3.5 x 75; 0.8 x 4.0 x 100; 1.0 x 5.5 x 125; 1.2 x 6.5 x 150 mm

3 PHILLIPS® screwdrivers No. 4630: PH1; PH2; PH3

1 FastGRIP water pump pliers No. 6572: L.240 mm

2 Circlip pliers No. 6545: A1; A2

2 Circlip pliers No. 6545: J1; J2

1 Combination pliers No. 6501: L.180 mm

1 Power side cutters No. 6602 L.160 mm head chrome-plated 2K-handles

1 Flat round nose pliers No. 6529: L.200 mm

1 Flat round nose pliers No. 6530: L.200 mm