Key features of torque screwdriver TORSIOTRONIC®
- electromechanically indicating and clicking
- for clockwise and counter-clockwise tightening
- visual, acoustic, and haptic stop signal
- with 1/4" external square drive (6.3 DIN 3120/ISO 1174-1) and integrated ratchet function with 80 teeth, ratchet angle of 4.5°, for 1/4" sockets
- after clicking, the clutch mechanism prevents unintended overshooting of the set tightening torque and overtightening of the screw is not possible
- bright and energy-efficient OLED colour display - readable from virtually any angle
- optical evaluation of the applied torque by traffic light colours on the display and LEDs at the side
- supported languages: DE, EN, IT, FR, ES
- stores up to 2,500 joint and sequence results, for transfer to the PC via an integrated micro-USB interface
- tolerances for evaluation purposes can be set individually
- short training time thanks to intuitive controls and an easy-to-understand menu structure
- three operating modes (Click, Track, Peak-Hold)
- bolted joints and sequences can be programmed
- with a 1/4" inner square at the end of the handle (6.3 DIN 3120/ISO 1174‑1) for accommodating a 1/4" T-handle
- units of measurement: cN·m, N·m, ft·lb, in·lb, in·oz
- the GEN3 version can charge the installed battery via the micro USB cable
- long battery life with battery-saving standby mode
- the batteries are quick and easy to change.
- supplied with 3.6 V lithium battery, type 18650, packaged according to UN 3481
- with 2-component handle
- patented
- in a sturdy plastic box
- calibration certificate in accordance with DIN EN ISO 6789‑2:2017
- accuracy ± 4%
Contains 29-pieces:
1 electromechanical torque screwdriver 1/4" No. TORSIOTRONIC® 10: measurement range: 100-1000 cN·m
8 sockets with hex 1/4" No. 40: 4; 5; 5.5; 6; 7; 8; 9; 10 mm
3 bits PHILLIPS® 1/4" No. PH 1221-1223: PH1; PH2, PH3
3 bits POZIDRIV® 1/4" No. PZ 1221-1223: PZ1; PZ2, PZ3
4 screwdriver sockets INHEX 1/4" No. 44K: 3; 4; 5; 6 mm
5 screwdriver sockets TORX® 1/4" No. 44KTX: T8; T9; T10; T15; T20
5 screwdriver sockets TORX® with hole 1/4" No. 44 KTXB: T8; T9; T10; T15; T20
+ sturdy plastic box, SensoMaster 4 software, USB cable, bit holder, T-handle (size 10), insulating washer, lithium battery 3.6 V, type 18650, packed in accordance with UN 3481