Torque wrench service MANOSKOP®(in·lb)
Torque wrench service MANOSKOP®(in·lb)
730a Quick
Artikel-Nr. 50584002|EAN 4018754292684
Produktvideo
Produkt-Varianten
| Art. no. | Size | Model | Measuring range in·lb | Length mm (L) | Width mm (b) | Height mm (h) | Size square socket [internal square drive] | LF | SF | Weight | Scale division in·lb | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 50584001 | a/2-1 | 730a Quick | 17,5-87,5 in·lb | 179 mm | 27,5 mm | 23,6 mm | 9 x 12 mm | 157,2 mm | 17,5 mm | 315 g | 2,5 in·lb | Jetzt entdecken |
| 50584002 | a/2 | 730a Quick | 30-175 in·lb | 179 mm | 27,5 mm | 23,6 mm | 9 x 12 mm | 157,2 mm | 17,5 mm | 315 g | 5 in·lb | |
| 50584004 | a/4 | 730a Quick | 70-350 in·lb | 223 mm | 27,5 mm | 23,6 mm | 9 x 12 mm | 200,8 mm | 17,5 mm | 395 g | 10 in·lb | Jetzt entdecken |
Technologien und Leistungsmerkmale
QuickRelease
The QuickRelease safety lock prevents unintentional loss of insert tools. These click securely into place, and are only released again at the push of a button for a quick tool change.
Tool Control System
The intelligent modular inlay system protects and organises the tools in tool boxes, tool trolleys and workbenches. Two-colour foam inlays make checking the completeness of the tools quick and easy.
Factory calibration certificate (ISO calibration)
Our torque tools, transducers, and test equipment are delivered with a factory calibration certificate in accordance with DIN EN ISO 6789-2:2017, and based on DKD-R 10-8 for traceability of the measuring equipment.
Low-wear flexible rod system
Our torque wrench is equipped with a low-wear trigger system with a bending beam. Unlike conventional torque wrenches with coiled springs, the flexible rod is not preloaded in unloaded state, which means that the 'spring' does not need to be reset to '0' after use.
2-component handle
Our 2-component handle is non-slip and ergonomically designed. It is resistant to the most common oils, greases, fuels, brake fluids, and Skydrol. The arrow markings on the handle indicate the direction of operation.
Eigenschaften
- click-type
- the measuring element is only under load while force is being applied, no need for manual reset to zero
- mount for interchangeable insert/shell tools
- QuickRelease safety lock (sizes 5–65)
- rapid setting thanks to easy-action locking lever in the handle (sizes 5–65)
- ergonomically designed, non-slip adjuster with a thumb recess
- magnifying glass integrated in the display window
- optimised convex handle for strain-free working
- dual stop signal
- twin scales N·m/ft·lb and N·m/in·lb (sizes 5–80)
- on request also available as an N·m-only version without twin scale (sizes 5-65)
- can be applied for either clockwise or anticlockwise tightening by turning the inserts over
- any force applied to the tool after the 'click' or applied in the opposite direction to the current function – e.g. forcible loosening of a jammed screw - does not act on the trigger mechanism and cannot cause damage to it
- calibration using perfectControl® calibrating unit No 7794 or calibration system No 7706. Readjustment does not require disassembly.
- certificate in accordance with DIN EN ISO 6789-2:2017
- display deviation value ± 4%
Produkt-Highlights
Rapid adjustment.
Easy and quick adjustment of the torque is carried out by an easy-to-operate clamping lever in the handle. The scale can be moved quickly and safely with an ergonomically shaped, non-slip adjustment element with thumb recess.
Adjustment does not require disassembly.
Quick adjustment from outside, no disassembly of the torque wrench required, with two adjustment points for the maximum & minimum values.
In unserem Kundenportal bieten wir weitere Informationen und Downloads.
Service
2025© All Rights Reserved