Torque wrenches Service MANOSKOP® (N·m)

Products/Torque tools/Torque wrenches, mechanical/Torque wrenches mechanical, for insert tools

Torque wrenches Service MANOSKOP® (N·m)

730 Quick

Produktvarianten

Artikel-Nr. 50184004|EAN 4018754292660

Robuster, wartungsarmer mechanischer Drehmomentschlüssel für den kontrollierten Schraubanzug.
Das Auslösen erfolgt mit einem deutlichen haptischen und akustischen Klick-Signal.
Blitzeinstellung des Drehmoments durch die leicht zu betätigende Entriegelungsmechanik am Gehäuse.
Dank eines langlebigen, verschleißarmes Auslösesystems mit Biegestab ist ein Rücksetzen auf „0“ nicht erforderlich.
Schnelles Justieren von außen ohne Demontage möglich.

Online Kaufen

Händlersuche

Produkt-Varianten

Product no.	Model	Size	Tool holder size [internal square]	Measuring range N·m	MA N·m	Nominal value N·m	Scale division N·m	Length mm (L)	Width mm (b)	Height mm (h)	LF	SF	Weight (g)	Maß-Skizze
50184001	730 Quick	2-1	9 x 12 mm	2-10 N·m	2 N·m	10 N·m	0,25 N·m	179 mm	27,5 mm	23,6 mm	157,2 mm	17,5 mm	315 g	Jetzt entdecken
50184002	730 Quick	2	9 x 12 mm	4-20 N·m	4 N·m	20 N·m	0,5 N·m	179 mm	27,5 mm	23,6 mm	157,2 mm	17,5 mm	315 g	Jetzt entdecken
50184004	730 Quick	4	9 x 12 mm	8-40 N·m	8 N·m	40 N·m	1 N·m	223 mm	27,5 mm	23,6 mm	200,8 mm	17,5 mm	395 g
91381054	730 Quick	2-1	9 x 12 mm	2-10 N·m	2 N·m	10 N·m	0,25 N·m	179 mm	27,5 mm	23,6 mm	157,2 mm	17,5 mm	315 g	Jetzt entdecken

Technologien und Leistungsmerkmale

QuickRelease

The QuickRelease safety lock prevents unintentional loss of sockets and insert tools. These click securely into place, and are only released again at the push of a button for a quick tool change. In transducers: The QuickRelease safety lock helps you to quickly mount and change transducers. The transducers lock into the calibration system and only unlock again at the push of the buttons.

Eigenschaften

clicking type with dual stop signal
no reset to "0" required
the measuring element is only under load when a force is applied.
mount for interchangeable insert tools
fine, tapered pointers
counter-clockwise tightening by turning the insert tool over
clicking mechanism insensitive to continuous loads and counter-loads (up to the max. measurement range of the torque wrench)
optimal calibration with perfectControl® calibration systems No. 7794 or calibration systems No. 7706, 7791
easy adjustment without disassembly via 2 external adjustment screws
with 2-component handle
calibration certificate in accordance with DIN EN ISO 6789-2:2017
accuracy ± 4%

Produkt-Highlights

Quick Adjustments, Easy

Protected against accidental changes, yet instantly unlocked at the push of a button and ready for setting the target torque: the quick adjust scale of the MANOSKOP® 730 Quick is as safe as it is efficient and precise.

Adjustment does not require disassembly.

Quick adjustment from outside, no disassembly of the torque wrench required, with 2 adjustment points for the maximum & minimum values.

Compact Lightweight

At just 197 mm in size 2 and 223 mm in size 4, the MANOSKOP® 730 Quick fits virtually anywhere, makes working in tight spaces easier, and impresses with its low weight.

Downloads

Bedienungsanleitung: 91979888-ba-manoskop-721-730quick-de-en-fr-es-it-jp.pdf

PDF | 2.31 MB

Kurzanleitung: 91974010-ka-skalenfenster-730quick-en.pdf

PDF | 0.26 MB

Kurzanleitung: 91979888-ka-730quick-en.pdf

PDF | 0.40 MB

Produktdatenblatt: STAHLWILLE_50184004_730-4-QUICK_en.pdf

PDF | 2.35 MB

Konformitaetserklaerung: REACH-50184004-730-4-QUICK.pdf

PDF | 0.09 MB

In unserem Kundenportal bieten wir weitere Informationen und Downloads.

Zum Kundenportal

Kontakt aufnehmen