Service MANOSKOP® torque wrenches
Service MANOSKOP® torque wrenches
Artikel-Nr. 50584012|EAN 4018754268993
- Quick adjustment thanks to easy-to-operate locking lever in handle.
- Efficient. No reset to '0' necessary, as the measuring element is only under load when a force is applied.
- Ergonomically shaped, non-slip adjuster with thumb recess and ergonomic handle for fatigue-free work.
- Clicking torque wrench with receptacle for interchangeable insert tools, double stop signal (tactile and audible), counter-clockwise tightening by turning the insert tools over.
- With calibration certificate, accuracy ± 4%.
Produktvideo
Produkt-Varianten
| Art. no. | Size | Measuring range N·m | Measuring range in·lb | Length mm (L) | Width mm (b) | Height mm (h) | Size square socket [internal square drive] | LF | SF | Weight | Scale division N·m | Scale division in·lb | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 50584005 | a/5 | 6-50 N·m | 50-440 in·lb | 315 mm | 28 mm | 23 mm | 9 x 12 mm | 288 mm | 17,5 mm | 780 g | 2 N·m | 10 in·lb | Jetzt entdecken |
| 50584010 | a/10 | 20-100 N·m | 180-880 in·lb | 370 mm | 28 mm | 23 mm | 9 x 12 mm | 343 mm | 17,5 mm | 934 g | 2,5 N·m | 20 in·lb | Jetzt entdecken |
| 50584012 | a/12 | 25-130 N·m | 225-1150 in·lb | 410 mm | 28 mm | 23 mm | 14 x 18 mm | 390 mm | 25 mm | 1076 g | 2,5 N·m | 25 in·lb | |
| 50584020 | a/20 | 40-200 N·m | 350-1750 in·lb | 455 mm | 28 mm | 23 mm | 14 x 18 mm | 435 mm | 25 mm | 1216 g | 5 N·m | 50 in·lb | Jetzt entdecken |
Technologien und Leistungsmerkmale
QuickRelease
The QuickRelease safety lock prevents unintentional loss of insert tools. These click securely into place, and are only released again at the push of a button for a quick tool change.
Factory calibration certificate (ISO calibration)
Our torque tools, transducers, and test equipment are delivered with a factory calibration certificate in accordance with DIN EN ISO 6789-2:2017, and based on DKD-R 10-8 for traceability of the measuring equipment.
Low-wear flexible rod system
Our torque wrench is equipped with a low-wear trigger system with a bending beam. Unlike conventional torque wrenches with coiled springs, the flexible rod is not preloaded in unloaded state, which means that the 'spring' does not need to be reset to '0' after use.
2-component handle
Our 2-component handle is non-slip and ergonomically designed. It is resistant to the most common oils, greases, fuels, brake fluids, and Skydrol. The arrow markings on the handle indicate the direction of operation.
Eigenschaften
- clicking type with dual stop signal
- no reset to '0' required
- the measuring element is only under load when a force is applied
- with holder for interchangeable insert tools
- with QuickRelease safety lock
- Quick adjustment thanks to easy-to-operate locking lever in handle.
- non-slip adjuster with thumb recess for quick torque adjustment
- dual scale N·m/in·lb
- counter-clockwise tightening by flipping the insert tools over
- clicking mechanism insensitive to continuous loads and counter-loads (up to the max. measurement range of the torque wrench)
- calibration with perfectControl® calibration device No. 7794, or calibration system No. 7791 or 7706
- easy adjustment without disassembly via 2 external adjustment screws
- with 2-component handle
- calibration certificate in accordance with DIN EN ISO 6789-2:2017
- accuracy ± 4%
Produkt-Highlights
Rapid adjustment.
Easy and quick adjustment of the torque is carried out by an easy-to-operate clamping lever in the handle. The scale can be moved quickly and safely with an ergonomically shaped, non-slip adjustment element with thumb recess.
Adjustment does not require disassembly.
Quick adjustment from outside, no disassembly of the torque wrench required, with two adjustment points for the maximum & minimum values.
In unserem Kundenportal bieten wir weitere Informationen und Downloads.
Service
2025© All Rights Reserved