VDE MANOSKOP® torque wrench
VDE MANOSKOP® torque wrench
730R VDE
- Mechanically setting/clicking torque wrench for controlled screw tightening.
- The special plastic sheath of the MANOSKOP® 730R VDE offers reliable protection for safe and efficient work at voltages of up to 1,000 volts.
- Low-wear releasing system with flexible rod ensures consistently correct and reliable measurement results.
- Re-adjustment on your own is possible without disassembly and the associated re-testing of the torque wrench insulation.
- Change the ratchet adaptor without checking the insulation again.
Produktvideo
Produkt-Varianten
| Product no. | Size | Measuring range N·m | Measuring range ft·lb | Measuring range in·lb | External square drive (inch) | Length mm (L) | b1 | b2 | Height mm (h1) | Height mm (h2) | Fine scale division | Size square socket [inside square drive] | LF | SF | Weight | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 96550125 | 2,5 | 4-25 N·m | 40-220 in·lb | 3/8 | 337 mm | 35 mm | 45 mm | 30 mm | 56 mm | 0,2 N·m | 9 x 12 mm | 253,5 mm | 28 mm | 1030 g | Jetzt entdecken | |
| 96550150 | 5 | 10-50 N·m | 7-37 ft·lb | - in·lb | 3/8 | 391,5 mm | 35 mm | 45 mm | 30 mm | 56 mm | 0,25 N·m | 9 x 12 mm | 308,5 mm | 28 mm | 1140 g |
Technologien und Leistungsmerkmale
QuickRelease
Factory calibration certificate (ISO calibration)
Low-wear flexible rod system
Eigenschaften
- tactile dual stop signal
- with 3/8" ratchet adaptor
- replace the ratchet adaptor 725QR VDE without having to check the insulation again
- QR safety lock
- fast, precise adjustment with QuickSelect quick adjustment
- double insulation allows to work at voltages of up to 1,000 while compliant with VDE (in line with IEC 60900)
- with an insulation madefrom glass fibre-reinforced polyamide plastic, which is resistant to fluids that often occur in working environments, such as alkaline solutions, fuels or oils
- easy to read double scale with colour differentiation of N·m/ft·lb
- no reset to "0" required, since measuring element is only loaded during tightening
- low-wear releasing mechanism
- readjustment without disassembly and without checking the insulation again
- calibration certificate in accordance with DIN EN ISO 6789-2:2017
- display deviation ± 3%
Produkt-Highlights
Adjustment does not require disassembly.
The VDE torque wrenches have two setting points for the upper and lower value, which allows for easy adjustment from the outside without requiring disassembly of the tool. This also means there is no need to check the insulation again.
Triggering dual stop signal.
The MANOSKOP® provides a clearly noticeable dual stop signal when the set value is reached.
Precise fine adjustment.
Thanks to QuickSelect, the target torque is set in no time at all. It is also extremely accurate, as it can be read off in very precise increments on the secondary fine scale.
Exchangeable ratchet adaptor.
The STAHLWILLE MANOSKOP® 730R VDE is the only insulated torque wrench on the market where the insert ratchet (9 x 12 mm, 3/8") can be replaced without the need for a new insulation test thanks to a mount for interchangeable insert tools (9 x 12 mm, 3/8").
Insulating plastic sheath.
The special plastic sheath of the MANOSKOP® 730R VDE reliably protects up to 1,000 volts. It is also non-slip, abrasion-resistant and resistant to diluted alkaline solutions, hydrocarbons, fuels and oils.
