Produkt-Varianten

Eigenschaften

Premium quality metric tools

• Extremely sturdy, resilient tool casemade of polypropylene for professional use
• The top cover is lined with napped foam to hold tools firmly in place
• Resistant to Skydrol, acetone, petrol and hydraulic fluids
• Toolsin threeTCS inserts*

Contents 54 items:

1 QuickRelease crank No 453QR 10 mm (3/8") L.386.5 mm

1 flat-bladed screwdriver with impact cap No 4622SK 3 1.2 x 6.5 x 125 mm, two-component grip

1 cruciform-tip screwdriver No 4631 PH 2, two-component grip

1 snipe-nose pliers No 6530 5 L.160 mm

1 wire-twisting pliers No 6575 1 220 L.230 mm

1 heavy-duty side-cutters No 6602 5 140 L.140 mm

1 pin punch No 108/150 X 6

1 pin punch No 108/115 X 2

1 engineer's hammer No 10961 300 g

1 telescopic mirror No 12921 M 1 1/4 inch / D. 32 mm

8 sockets 6.3 mm (1/4") No 40 Dbi-hex sizes 5; 6; 7 ; 8; 9 ;10; 12; 13 mm

6 sockets 12.5 mm (1/2") No 45 bi-hex sizes 14; 16; 17; 19; 20; 22

1 extension No 405/2 6.3 mm (1/4") L.54 mm

1 extension No 405/4 6.3 mm (1/4") L.100 mm

1 universal joint No 407 6.3 mm (1/4") L.37 mm

1 adaptor No 4091/4 to 3/8" L.25 mm

1 reversible ratchet No 415QR N6.3 mm (1/4") working angle 4.5° L.117 mm

1 bit holder No 412, 1/4" 6.3 mm (1/4") L.25 mm

1 extension No 427/36.3 mm (1/4") L.76 mm

1 extension No 427/56.3 mm (1/4") L.125 mm

1 universal joint No 428 L.46 mm

1 reduction piece No 431 3/8 to 1/4"

1 QuickRelease fine-tooth ratchet No 435QR N 10 mm (3/8") working angle 4.5° L. 193 mm

1 bit holder No 442 10 mm (3/8") 1/4" female hex L.32 mm

1 strap wrench No 12005 strap L.600 mm

1 bit box No 1204/21-1, magn. bit holder PH+PZ+TX+SL 20pc set

1 ratcheting bit-holder No 4008-1 6.3 mm (1/4") L.127 mm

11 combination spanners OPEN BOX No 13sizes 6; 7; 8; 9; 10; 12; 13; 14; 15; 17;19mm

1 nylon mallet No10956N 32 head D.32 mm

1 wire cutter No 13148

1 scriber No 12321

1 torch No 13126-2

*The advantages at a glance:

With our Tool Control System, the tools are arranged in chemical-resistant special foam insert with sculpted three-dimensional cut-outs.

The signal colour is yellow. A glance is enough to see whether all tools are in their correct places: If you can see yellow, there is a tool missing.