Torque wrench MANOSKOP®
Torque wrench MANOSKOP®
730R Quick
Artikel-Nr. 96501054|EAN 4018754339976
- Releasing
Produkt-Varianten
| Art. no. | Measuring range N·m | External square drive (inch) | Length mm (L) | Width mm (b) | Height mm (h) | Weight | |
|---|---|---|---|---|---|---|---|
| 96501054 | 2-10 N·m | 1/4 | 250 mm | 60 mm | 55 mm | 480 g | |
| 96504002 | 4-20 N·m | 3/8 | 255 mm | 55 mm | 55 mm | 455 g | Jetzt entdecken |
| 96504004 | 8-40 N·m | 3/8 | 285 mm | 55 mm | 55 mm | 642 g | Jetzt entdecken |
| 96504005 | 6-50 N·m | 3/8 | 380 mm | 50 mm | 50 mm | 994 g | Jetzt entdecken |
| 96504010 | 20-100 N·m | 1/2 | 430 mm | 55 mm | 55 mm | 1190 g | Jetzt entdecken |
| 96504012 | 25-130 N·m | 1/2 | 475 mm | 52 mm | 52 mm | 1488 g | Jetzt entdecken |
| 96504020 | 40-200 N·m | 1/2 | 530 mm | 55 mm | 55 mm | 1626 g | Jetzt entdecken |
| 96504030 | 60-300 N·m | 1/2 | 590 mm | 50 mm | 50 mm | 1400 g | Jetzt entdecken |
| 96504040 | 80-400 N·m | 3/4 | 675 mm | 72 mm | 63 mm | 2694 g | Jetzt entdecken |
Eigenschaften
- releasing
- No reset to "0" necessary, as measuring element is only loaded during the tightening process
- receptacle for interchangeable plug-in tools
- QuickRelease safety lock
- Flash adjustment by easy-to-operate clamping lever in the handle
- ergonomically shaped, non-slip adjustment element with thumb recess
- optimised ball handle for fatigue-free working
- double stop signal
- double scale N-m/ft-lb or N-m/in-lb
- on request also available as N-m version only without double scale
- left-hand tightening by turning over the plug-in tools
- further loads after releasing or loads against the functional direction, e.g. with stuck screws, do not affect the releasing mechanism, which is thus protected against damage
- calibration with the perfectControl® calibration device no. 7794 or the calibration system no. 7706. If necessary, readjustment without disassembly
- certificate according to DIN EN ISO 6789-2:2017
- display deviation ± 4 %
Produkt-Highlights
Flexible rod principle.
Mechanical torque wrenches from STAHLWILLE have a wear-resistant trigger system with a ¢exible rod. In contrast to conventional torque wrenches with spiral springs, the STAHLWILLE system eliminates one key work step: once the fastener has been tightened, it is not necessary to reset the wrench to »0«.
Fast.
Rapid setting thanks to the easy-action locking lever in the handle. Ergonomically designed, non-slip adjuster with a thumb recess for fast, safe setting of the slider.
Simple.
Quick adjustment from outside, no disassembly of the torque wrench required, with two adjustment points for the maximum & minimum values.
In unserem Kundenportal bieten wir weitere Informationen und Downloads.
