71020001

Puller

11200

Artikel-Nr. 71020001|EAN 4018754341788

The adjustable extractor hooks make universal use as an external or internal extractor possible.
For quick and safe removal of gears, ball bearings, pulleys and for extracting the outer races of ball bearings and bushings from drilled holes.
The adjustment scale on the crosshead enables precise and even adjustment of the pullers.
The nitrided surface of the pressure spindle provides excellent sliding properties and does not require additional oiling.
The adjustment scale on the crosshead enables precise and even adjustment of the pullers.

Produkt-Varianten

Art. no.	Size	External hex drive (mm)	Number of hooks	max. load	Clamping depth (h) mm	External span max. mm (w1)	Internal span max. mm (w2)	Internal span min. mm	Spindle thread size	Hook base width mm (b)	Hook base depth mm (c)	Thickness of hook base tip mm (a)	Weight	Maß-Skizze
71020001	1	17 mm	2	3 t	100 mm	90 mm	140 mm	60 mm	M14 x 1,5 x 140	22 mm	12 mm	3 mm	1014 g
71020002	2	17 mm	2	3 t	100 mm	130 mm	180 mm	70 mm	M14 x 1,5 x 140	22 mm	12 mm	3 mm	1136 g	Jetzt entdecken
71020003	3	22 mm	2	5 t	150 mm	160 mm	220 mm	80 mm	G 1/2 x 210	30 mm	18 mm	4 mm	2931 g	Jetzt entdecken
71020004	4	22 mm	2	5 t	150 mm	200 mm	260 mm	90 mm	G 1/2 x 210	30 mm	18 mm	4 mm	3322 g	Jetzt entdecken
71020005	5	27 mm	2	7,5 t	200 mm	250 mm	330 mm	125 mm	G 3/4 x 280	36 mm	28 mm	7 mm	6969 g	Jetzt entdecken
71020006	6	27 mm	2	7,5 t	200 mm	350 mm	420 mm	125 mm	G 3/4 x 280	36 mm	28 mm	7 mm	8042 g	Jetzt entdecken

Eigenschaften

two-armed
with sliding, constantly parallel extractor hooks
for pulling off gears, ball bearings, pulleys and similar parts from a shaft or axle
for pulling ball bearings, ball bearing outer races and sockets out of drilled holes
can be used as an external or internal extracting device by switching the hooks
nitrided spindle, no oiling required, maintenance-free
adjustment scale for uniform adjustment of the extractor hooks
sturdy design, galvanised

Puller