24.07.2025
More power, less effort: MULTIPOWER MP300
Inhalt
If you need to make a very high torque bolted connection, you can use a cumbersome torque wrench with a very long lever or a high torque tool. Or use the rules of physics with the MULTIPOWER torque multiplier from STAHLWILLE.
The MULTIPOWER MP300 torque multiplier saves you time and effort. When attached to your STAHLWILLE torque wrench, it multiplies your torque input. So you don't need an additional torque wrench to apply even the highest torques.
01.
High-efficiency planetary gear
Five versions of the MP300 are available. Common to all: Inside, a reliable, precise and durable planetary gear. Depending on the model, it offers a smaller or larger gear ratio and multiplies the applied torque by a factor between 3.5 and 17.
02.
Five versions, from 800 to 5000 N·m
Different torques can thus be achieved with each version of the MP300. The maximum output torque is shown behind the hyphen in the product name: For example, the MP300-800 achieves a maximum torque of 800 N·m. The maximum input torque here is 229 N·m. At the other end of the power spectrum is the MP300-5000: It converts a maximum input torque of 294 N·m into an impressive 5,000 N·m. Practical: There is a useful conversion table on the top of each MP300 for ease of use.
03.
Efficient and safe
All five models impress with the typical STAHLWILLE tight manufacturing tolerances for optimal frictional connection. Combined with excellent ergonomics, this ensures efficient, safe work that is gentle on joints and bolts.
Models MP300-2000, MP300-3000 and MP300-5000 also have a backstop and an overload protection in the form of a sun gear with predetermined breaking point. A replacement sun gear is included in the box, and users can replace it themselves. STAHLWILLE has thought of everything once again!
5,000 N·m isn't enough for you? Then get in touch with us: We can supply other versions up to a maximum torque of 12,000 N·m on request!
Service
2025© All Rights Reserved