50010004

Clé dynamométrique séries MANOSKOP® avec logement pour outils à insérer

Artikel-Nr. 50010004|EAN 4018754031603

Réf. n°	Dim.	Plage de mesure N·m	Plage de mesure ft-lb	Valore di gamma inferiore N·m	Valeur nominale N·m	Longueur mm (L)	Largeur mm (b)	Hauteur mm (h)	Taille du porte-outil [carré intérieur]	Longueur fonctionelle	SF	Poids	Maß-Skizze
50010004	4	4-40 N·m	3-30 ft·lb	4 N·m	40 N·m	201 mm	22 mm	18 mm	9 x 12 mm	172 mm	17,5 mm	500 g
50010010	10	20-100 N·m	15-74 ft·lb	20 N·m	100 N·m	318 mm	28 mm	24 mm	9 x 12 mm	289 mm	17,5 mm	635 g	Jetzt entdecken
50010020	20	40-200 N·m	30-147 ft·lb	40 N·m	200 N·m	457 mm	28 mm	24 mm	14 x 18 mm	435 mm	25 mm	1045 g	Jetzt entdecken
50010030	30	60-300 N·m	40-220 ft·lb	60 N·m	300 N·m	609 mm	28 mm	24 mm	14 x 18 mm	587 mm	25 mm	1210 g	Jetzt entdecken

For work on conveyor belts or in serial production. No adjustment scale; therefore adjustment with test equipment is required, e.g. with the STAHLWILLE test devices No. 7707 W, SmartCheck or the calibration systems No. 7794, No. 7706.
Triggering
Mount for interchangeable insert tools (755/4-30)
Dual stop signal
Particularly lightweight and easy to handle
Handle and shaft made of square steel pipe
Further loading after triggering or loads in the opposite direction of operation (max. up to the measurement range limit of the torque wrench) do not affect the trigger mechanism, which protects it from damage
Counter-clockwise tightening with plug-in insert tools
On request with pre-set trigger value (price surcharge 10%)
Adjustment with torque wrench test device
Display deviation ± 4 %

Bedienungsanleitung: 91979860-ba-manoskop-755R-1-755.pdf

PDF | 0.47 MB

Produktdatenblatt: STAHLWILLE_50010004_755-4_fr.pdf

PDF | 0.12 MB

In unserem Kundenportal bieten wir weitere Informationen und Downloads.