Produkt-Varianten

Eigenschaften

Contents 157 pieces:

96830264, TCS 1 821/38

11 sockets with hex 1/4" No. 40: 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm

17 sockets with hex 1/2" No. 52: 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm

2 QuickRelease extensions 1/4" No. 405QR: L. 54; 150 mm

1 QuickRelease ratchet 1/4" No. 415QR N: L. 117 mm

1 bit connector No. 3116: L. 25 mm

2 QuickRelease extensions 1/2" No. 509QR: L. 130; 255 mm

1 QuickRelease ratchet 1/2" No. 512QR N: L. 265.5 mm

1 transition piece No. 410: 1/4 to 1/2"

1 transition piece No. 513: 1/2 to 3/8"

1 bit holder 1/4" No. 412: L. 25 mm

96830265 TCS 2 821/59

2 bit ratchet screwdriver 1/4" No. 4008: L. 95; 250 mm

1 bit holder 1/4" No. 4009: L. 176 mm

1 bit set No. 1206: 1 bit holder | L. 25 mm: SL4;5;6 mm (2x) | PH1;2;3 (3x) | PZ1;2;3 (3x) | T10;15;20;25;27;30;40 (2x) | T BO10;15;20;25;27;30;40 | INHEX 3;4;5 mm | L. 75 mm: SL6 mm | PH2;3 | PZ1;2 | T20;25 | 56-parts

96830266, TCS 3 821/4

1 water pump pliers No. 6551: L. 240 mm

1 Side cutter No. 6602: L. 160 mm

1 Round nose pliers No. 6529: L. 200 mm

1 Combination pliers No. 6700: L. 180 mm

96830267, TCS 4 821/22

16 Combination spanner No. 13: 6; 7; 8; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24 mm

1 adjustable open-ended spanner No. 4025: max. spanner size 34 mm

5 combination ratcheting spanner, flat No. 17F: 8; 10; 13; 17; 19 mm

96830268, TCS 5 821/27

1 Electronic slotted screwdriver no. 4628: 0.4 x 2.5 x 60 mm

2 Slotted screwdriver no. 4620: 0.8 x 4 x 100; 1.6 x 10 x 200 mm

3 PHILLIPS® screwdrivers no. 4630: PH1; PH2; PH3

1 cable knife no. 12320: blade l. 90 mm

1 tape measure no. 12935/3: l. 3 m

1 Mini magnetic lifter No. 12600: 270 g

1 Wooden folding rule No. 13111: L. 2 m

1 Set of TORX® ballpoint L-spanners No. 10771/8: T9; T10; T15; T20; T25; T27; T30; T40

1 set of hex ballpoint L-spanner No. 10767/9: 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

96830269, TCS 6 821/7

1 locksmith's hammer No. 10961: 500 g

1 soft-face mallet No. 10959: D. 35 mm

1 flat chisel No. 102: L. 175 mm

1 pin punch No. 108: 150 x 6 mm

1 center punch No. 105: 100 x 10 mm

1 pin punch No. 109: D. 3.4 mm

1 drift punch No. 104: 120 x 4 mm