Calibration system complete
Calibration system complete
7794-2 Sets
Artikel-Nr. 96521078|EAN 4018754214679
Produktvideo
Produkt-Varianten
| Art. no. | Längd mm (L) | Bredd mm (b) | Höjd mm (h) | Antal verktyg | Område N·m | Funktionell längd (LF) max. mm | för givare | Vikt (g) | Profilens bredd | |
|---|---|---|---|---|---|---|---|---|---|---|
| 96521078 | 1200 mm | 800 mm | 820 mm | 23 st. | 815 mm | 71300 g | 180 mm | |||
| 96521079 | 1200 mm | 800 mm | 950 mm | 24 st. | 1390 mm | 76300 g | 180 mm | Jetzt entdecken |
Technologien und Leistungsmerkmale
Certifikat för fabrikskalibrering (ISO-kalibrering)
Våra vridmomentverktyg, givare och testutrustning levereras med ett fabrikskalibreringscertifikat i enlighet med DIN EN ISO 6789-2 och baserat på DKD-R 10-8 för spårbarhet av mätutrustning.
Eigenschaften
- The electronic perfectControl calibration device with manual drive significantly reduces the effort and time required for calibrations and adjustments of torque wrenches.
- Measurement without shifting the point of application of force
- avoidance of incorrect measurements with the help of the precisely mounted spindle and the ergonomically shaped handwheel
- extremely precise calibration through optimisation of the bearing and the square receptacles of the transducers
- Quick and easy change of transducers due to QuickRelease locking mechanism
- Convenient key operation for clockwise and anticlockwise measurements with automatic speed adjustment
- Time-saving by fixing the bridge support with an eccentric clamp that can be operated with one hand
- transfer of measured values via USB interface to a PC for further processing and archiving
- a calibration certificate can be printed out after calibration or saved as a PDF file
- input and output calibrations can be documented
- DIN EN ISO 6789 is supported in numerous languages during calibration. Other standards and factory specifications on request
- Can be upgraded to perfectControl calibration device no. 7794-3 for angle wrenches
- calibrations up to 1000 N·m with the help of the easy-to-mount extension no. 7791-1
- registered design, patents pending
- triggering and measuring torque spanners can be calibrated
- Calibration of transducers with the aid of torque reference spanners No. 7770-100 and 7770-1000 possible on request
- Included in delivery:
- 3 transducers
- 6 calibration square insertion tools No. 734K (sizes 4, 5, 12, 20, 40, 100)
- 6 square adaptors (No. 409M, No. 7787, No. 7788, No. 7789, No. 7789-4, No. 7789-5)
- 1 USB adaptor No. 7757-1
- 1 TorkMaster software no. 7731-1
- 1 jack plug cable No. 7751
- 1 spiral cable no. 775
- 1 spiral cable no. 7751-2 with jack plug and precision plug connector with self-locking mechanism
- 1 cold appliance cable set
- 1 offset screwdriver No. 10760CV SW 2 mm
- delivery without torque spanner and laptop
In unserem Kundenportal bieten wir weitere Informationen und Downloads.
Service
2024© All Rights Reserved