Service MANOSKOP® torque wrenches
Service MANOSKOP® torque wrenches
730Na
Artikel-Nr. 50581010|EAN 4018754139576
Produkt-Varianten
| Product no. | Size | Model | Measuring range ft-lb | Measuring range in-lb | Length mm (L) | Width mm (b) | Height mm (h) | Fine scale division | Tool holder size [internal square] | LF | SF | Weight (g) | Scale division in-lb | Scale division ft-lb | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 50581005 | a/5 | 730Na | 7-37 ft·lb | 90-450 in·lb | 330 mm | 28 mm | 23 mm | 2,5 in·lb | 9 x 12 mm | 280,5 mm | 17,5 mm | 831 g | 50 in·lb | 1 ft·lb | Jetzt entdecken |
| 50581010 | a/10 | 730Na | 15-75 ft·lb | 180-900 in·lb | 386 mm | 28 mm | 23 mm | 5 in·lb | 9 x 12 mm | 336 mm | 17,5 mm | 988 g | 100 in·lb | 2,5 ft·lb | |
| 50581020 | a/20 | 730Na | 30-150 ft·lb | 350-1800 in·lb | 467 mm | 28 mm | 23 mm | 10 in·lb | 14 x 18 mm | 424,5 mm | 25 mm | 1264 g | 100 in·lb | 5 ft·lb | Jetzt entdecken |
| 50581040 | a/40 | 730Na | 60-300 ft·lb | 800-3600 in·lb | 607 mm | 28 mm | 23 mm | 2 ft·lb | 14 x 18 mm | 564,5 mm | 25 mm | 1655 g | 100 in·lb | 20 ft·lb | Jetzt entdecken |
| 50581102 | a/2 | 730Na | 3-15 ft·lb | 40-180 in·lb | 275 mm | 28 mm | 23 mm | 2 in·lb | 9 x 12 mm | 226 mm | 17,5 mm | 737 g | 10 in·lb | 0,5 ft·lb | Jetzt entdecken |
Technologien und Leistungsmerkmale
QuickRelease
The QuickRelease safety lock prevents unintentional loss of insert tools. These click securely into place, and are only released again at the push of a button for a quick tool change.
QuickSelect
Lightning-fast target value setting: Unlock the adjustment knob, set the value, and lock the knob again.
Low-wear flexible rod system
Our torque wrench is equipped with a low-wear trigger system with a bending beam. Unlike conventional torque wrenches with coiled springs, the flexible rod is not preloaded in unloaded state, which means that the 'spring' does not need to be reset to '0' after use.
2-component handle
Our 2-component handle is non-slip and ergonomically designed. It is resistant to the most common oils, greases, fuels, brake fluids, and Skydrol. The arrow markings on the handle indicate the direction of operation.
Factory calibration certificate (ISO calibration)
Our torque tools, transducers, and test equipment are delivered with a factory calibration certificate in accordance with DIN EN ISO 6789-2:2017, and based on DKD-R 10-8 for traceability of the measuring equipment.
Eigenschaften
- clicking type with dual stop signal
- no reset to "0" required
- the measuring element is only under load when a force is applied
- mount for interchangeable insert tools
- with QuickRelease safety lock
- fast, precise adjustment with QuickSelect quick adjustment
- dual scale ft·lb/in·lb
- clicking mechanism insensitive to continuous loads and counter-loads (up to the max. measurement range of the torque wrench)
- counter-clockwise tightening by flipping the insert tools over
- optimal calibration with perfectControl® calibration systems No. 7794 or calibration systems No. 7706, 7791
- easy adjustment without disassembly via 2 external adjustment screws
- with 2-component handle
- calibration certificate in accordance with DIN EN ISO 6789-2:2017
- accuracy ± 3% (size a/2: 4%)
Produkt-Highlights
Adjustment does not require disassembly.
Quick adjustment from outside, no disassembly of the torque wrench required, with 2 adjustment points for the maximum & minimum values.
Clicking dual stop signal.
When the target torque is reached, MANOSKOP® 730N provides a noticeable tactile dual stop signal.
Clear fine adjustment.
The easy-to-use and easy-to-read double scale in N·m/ft·lb allows precise and easy target torque adjustment for reliable and accurate application.
In unserem Kundenportal bieten wir weitere Informationen und Downloads.
