Torque wrenches Standard MANOSKOP®

Image

Torque wrenches Standard MANOSKOP®

721 Quick

Artikel-Nr. 50204030|EAN 4018754268948
  • Made in Germany - STAHLWILLE setting torque wrench, length 553 mm, with calibration certificate (DIN EN ISO 6789-2:2017), 50204030.
  • Patented, low-wear release system with flexible rod.
  • Lightning-fast and precise torque adjustment.
  • Continued loading after release or loading in the opposite direction will not damage the torque wrench.

Produkt-Varianten

Art. no.SizeModelMeasuring range N·mMeasuring range ft·lbMA N·mNominal value N·mExternal square drive (inch)Length mm (L)b1b2Height mm (h1)Height mm (h2)Number of teethLFWeightScale division N·mScale division ft·lb
502040055721 Quick6-50 N·m5-36 ft·lb6 N·m50 N·m3/8352 mm28 mm27,5 mm23 mm14,5 mm30293 mm880 g2 N·m1 ft·lb
Jetzt entdecken
5020401515721 Quick30-150 N·m25-110 ft·lb30 N·m150 N·m1/2452 mm28 mm41 mm23 mm18 mm36387 mm1282 g5 N·m5 ft·lb
Jetzt entdecken
5020402020721 Quick40-200 N·m30-145 ft·lb40 N·m200 N·m1/2483 mm28 mm41 mm23 mm18 mm36418 mm1349 g5 N·m5 ft·lb
Jetzt entdecken
5020403030721 Quick60-300 N·m50-220 ft·lb60 N·m300 N·m1/2553 mm28 mm44 mm23 mm27,5 mm36486 mm1646 g10 N·m10 ft·lb

Technologien und Leistungsmerkmale

Factory calibration certificate (ISO calibration)

Our torque tools, transducers, and test equipment are delivered with a factory calibration certificate in accordance with DIN EN ISO 6789-2:2017, and based on DKD-R 10-8 for traceability of the measuring equipment.

2-component handle

Our 2-component handle is non-slip and ergonomically designed. It is resistant to the most common oils, greases, fuels, brake fluids, and Skydrol. The arrow markings on the handle indicate the direction of operation.

Eigenschaften

    • tactile with dual stop signal
    • no reset to "0" required
    • the measuring element is only under load when a force is applied.
    • Quick adjustment thanks to easy-to-operate locking lever in handle
    • non-slip adjuster with thumb recess for quick torque adjustment
    • dual scale N·m/ft·lb
    • triggering mechanism insensitive to continuous loads and counter-loads (up to the max. measurement range of the torque wrench)
    • calibration with perfectControl® calibration system No. 7794, or calibration system No. 7791 or 7706
    • easy adjustment without disassembly via 2 external adjustment screws
    • for controlled clockwise tightening
    • with 2-component handle
    • calibration certificate in accordance with DIN EN ISO 6789-2:2017
    • accuracy ± 4%

Produkt-Highlights

Rapid adjustment.

Easy and quick adjustment of the torque is carried out by an easy-to-operate clamping lever in the handle. The scale can be moved quickly and safely with an ergonomically shaped, non-slip adjustment element with thumb recess.

Adjustment does not require disassembly.

Quick adjustment from outside, no disassembly of the torque wrench required, with two adjustment points for the maximum & minimum values.

Downloads

Bedienungsanleitung: 91979888-ba-manoskop-721-730quick-de-en-fr-es-it-jp.pdf
PDF | 2.31 MB
Kurzanleitung: 91974010-ka-skalenfenster-730quick-en.pdf
PDF | 0.26 MB
Produktdatenblatt: STAHLWILLE_50204030_721-30 QUICK_en.pdf
PDF | 0.63 MB
In unserem Kundenportal bieten wir weitere Informationen und Downloads.

Zubehör-Artikel.