QuickRelease tool assortment with workbench
QuickRelease tool assortment with workbench
WB 621/238QR
- Sturdy, mobile workbench with a 238-piece tool assortment for repairs and maintenance work on agricultural, construction and commercial vehicles.
- Tools for high power transmission: 1/2" sockets, extra-long spanners, multiple screwdrivers, etc.
- Patented QuickRelease locking system secures every component, from the ratchet to the extension to the socket.
- WB 621 with 7 fully extendable drawers, one cabinet section with height-adjustable shelf and cabling.
- The tools are securely integrated in durable, chemical-resistant TCS inlays with precise recesses and signal surfaces.
Produkt-Varianten
| Product no. | Model | Length mm (L) | Width mm (b) | Height mm (h) | Number of drawers | Number of tools | Colour | Weight (g) | |
|---|---|---|---|---|---|---|---|---|---|
| 98830204 | WB 621/238QR | 500 mm | 1150 mm | 1045 mm | 7 + 1 Fach | 238 pcs. | anthracite, RAL 7016; black, RAL 9005 | 135000 g |
Technologien und Leistungsmerkmale
Tool Control System
Modular Inlay System
QuickRelease
Eigenschaften
- for service and maintenance work on agricultural, construction and commercial vehicles
- metric tools
- extra long spanner for increased leverage
- three-stage safety concept:
- central locking with a lateral cylinder lock and folding key
- individual locks prevent inadvertent opening during transit
- tilt protection - it is not possible to pull out several drawers at the same time
- 7 easily removable drawers with full extension and ball bearing cage guide
- 2 drawers in generous XXL format, 880 mm
- lockable cabinet section with height-adjustable shelf (70 mm grid)
- cabling through 2 rubberised grommets
- removable cable duct on the back side
- oil and acid-resistant wheels (Ø 125 mm) with bearings protected from the ingress of dirt and fibres, and 2 parking brakes
- RAL 7016 body, RAL 9005 drawers with durable industrial powder coating
- safely integrated in the modular Tool Control System (TCS)
Key features workbench WB 621
1 workbench, anthracite No. WB 621: 7 drawers and cabinet compartment
Contains 238-pieces:
96830288
23 sockets with hex 1/2" No. 52: 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 23; 24; 25; 26; 27; 28; 30; 32; 34; 36 mm
10 screwdriver sockets INHEX 1/2" No. 54: 4; 5; 6; 7; 8; 10; 12; 14; 17; 19 mm
3 screwdriver sockets TORX® 1/2" No. 54TX: T20; T25; T27
6 screwdriver sockets TORX® 1/2" No. 1054TX: T30; T40; T45; T50; T55; T60
11 sockets with hex 1/4" No. 40: 5; 5.5; 6; 7; 8; 9; 10; 11;12; 13; 14 mm
4 screwdriver sockets INHEX 1/4" No. 44K: 4; 5; 6; 8 mm
6 screwdriver sockets TORX® 1/4" No. 44KTX: T8; T9; T10; T15; T20; T25
1 square drive adaptor No. 410: 1/4 to 1/2"
1 bit holder 1/4" No. 412: L. 25 mm
1 bit adaptor, manual 1/4" No. 3116: L. 25 mm
1 bit ratchet screwdriver 1/4" No. 4008: L. 250 mm
1 telescopic ratchet 1/2" No. 516: L. 410-630 mm
1 QuickRelease T-handle 1/2" No. 506QR: L. 300 mm
2 QuickRelease extensions 1/2" No. 509QR: L. 130; 255 mm
1 QuickRelease universal joint 1/2" No. 510QR: L. 80 mm
1 QuickRelease fine-tooth ratchet 1/4" No. 415QR N: L. 117 mm
1 QuickRelease drive handle 1/4" No. 400QR: L. 150 mm
2 QuickRelease extensions 1/4" No. 405QR: L. 54; 150 mm
1 QuickRelease T-handle 1/4" No. 404QR: L. 116 mm
1 QuickRelease universal joint 1/4" No. 407QR: L. 45 mm
1 bit fine-tooth ratchet 1/4" No. 415SGB N: L. 117 mm
1 QuickRelease fine-tooth ratchet 3/8" No. 435QR N: L. 193 mm
1 QuickRelease extension 3/8" No. 427QR: L. 160 mm
1 square drive adaptor No. 432: 1/2 to 3/8"
1 square drive adaptor No. 431: 1/4 to 3/8"
1 automotive circuit tester No. 12905: 6-12 and 24 V
1 L-Key set hex No. 10767/9: 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm
2 L-Keyss hex No. 10765: 12; 14 mm
1 L-Key set TORX® No. 10766/8: T9; T10; T15; T20; T25; T27; T30; T40
1 bit box No. 1206: 1 bit holder | L. 25 mm: SL4;5;6 mm (2x) | PH1;2;3 (3x) | PZ1;2;3 (3x) | T10;15;20;25;27;30;40 (2x) | T BO10;15;20;25;27;30;40 | INHEX 3;4;5 mm | L. 75 mm: SL6 mm | PH2;3 | PZ1;2 | T20;25 | 56-pieces
96830289
7 pin punches No. 108: Ø 2; 3; 4; 5; 6; 8; 10 mm
1 centre punch No. 105: Ø 12 mm
1 engineer’s hammer No. 10961: 500 g
1 flat chisel No. 102: W. 24; L. 200 mm
1 dead blow hammer No. 10959: Ø 50 mm
1 cross-cut chisel No. 103: W. 18; L. 200 mm
1 engineer’s hammer No. 10961: 1500 g
1 gasket scraper No. 12718: L. 265 mm
1 lever bar No. 11007: L. 400 mm
1 magnetic lifter No. 12600: 3000 g
1 tape measure No. 12935: L. 5 m
1 flat file No. 12036: L. 260 mm
1 half-round file No. 12030: L. 260 mm
1 round file No. 12025: L. 210 mm
1 precision feeler gauge, 20 blades No. 11095: 0.05-1.00 mm
1 adjustable spanner No. 4025: max. 39 mm
1 wire brush No. 12374: L. 290 mm
96830290
22 combination spanners No. 14: 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32; 36 mm
96830291
1 caliper No. 12900: Measuring range: 150 mm/6"
1 PH cross-head screwdriver No. 4734: PH2
1 slotted screwdriver No. 4724: 1.0 x 5.5 x 25 mm
1 cable knife No. 12320: Blade length: 90 mm
6 TORX® screwdrivers No. 4650: T10; T15; T20; T25; T30; T40
3 PH cross-head screwdrivers with impact cap No. 4632SK: PH1; PH2; PH3
4 slotted screwdrivers with impact cap No. 4622SK: 0.8 x 4.0 x 90; 1.0 x 5.5 x 100; 1.2 x 6.5 x 125; 1.2 x 8.0 x 150 mm
1 PH cross-head screwdriver No. 4632: PH4
1 torch No. 13132: 130 lm
1 wooden folding ruler No. 13112: L. 2 m
96830292
8 circlip pliers No. 6543-6546: J1; J2; J11; J21; A1; A2; A11; A21
1 side cutter No. 6720: L. 160 mm
1 water pump pliers No. 6572: L. 240 mm
1 telephone pliers No. 6730: L. 160 mm
1 combination pliers No. 6700: L. 180 mm
1 wire stripper: max. Ø 4 mm²
1 crimping pliers No. 6638: L. 220 mm
Produkt-Highlights
Customised complete solution.
Our extensive product range contains high-quality tools for repairing and maintaining tractors, commercial, agricultural and construction vehicles. Among other things, it includes ratchets in all drive sizes, sockets up to 36 mm, various screwdrivers, large hammers, a wide range of bit sets, electronic calipers, numerous pairs of pliers, torches, drift punches, magnet lifters and much more. This equipment gives you a solid basis for maintaining engines, gearboxes, hydraulics, bodywork, and electronics.
Large versions.
This special range of products contains tools for particularly high force transmission for bolted joints on large components: The extra-long combination spanners provide optimum leverage for additional force. The sockets in sizes of up to 36 mm are ideally suitable for tightening or loosening large screws, nuts and bolts on tractors and agricultural machinery.
Mobile workstation.
The 7 full-extension drawers are pre-equipped with STAHLWILLE tools in safety foam inserts. A separate, lockable cabinet section with height-adjustable shelf provides additional storage space. The spacious 115 cm long work surface allows you to examine large components. Organised cable routing increases your safety in the workplace. With a working height of 104 cm and four smooth-running wheels, you have the ideal conditions for ergonomic and mobile working, both in and outside the workshop.
